FOOD GRADE NANOSTRUCTURES OF PUMPKIN LEAVES PROTEIN/PULLULAN BLEND AS A POTENTIAL CARRIER FOR COBALAMIN

Ana  Salević-Jelić; Zorica Knežević-Jugović; Branko  Bugarski; Smilja Marković; Viktor Nedović; Verica Đorđević; Bojana Balanč

doi:10.5937/ffr0-51613

Ana Salević-Jelić University of Belgrade, Faculty of Agriculture, Nemanjina 6, 11080 Belgrade, Serbia
Zorica Knežević-Jugović University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia
Branko Bugarski University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia
Smilja Marković Institute of Technical Sciences of SASA, Knez Mihailova 35/IV, 11000, Belgrade, Serbia
Viktor Nedović University of Belgrade, Faculty of Agriculture, Nemanjina 6, 11080 Belgrade, Serbia
Verica Đorđević University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia
Bojana Balanč University of Belgrade, Innovation Centre of Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia

DOI: https://doi.org/10.5937/ffr0-51613

Keywords: nanostructures, electro-hydrodynamic processing, pumpkin leaves protein, pullulan, cobalamin

Abstract

Nowadays, nanostructures made of biopolymers, such as proteins and polysaccharides, have gathered the growing attention of food scientists. In this study, pumpkin leaves from field crop side streams were processed to produce the protein isolate. The leaf protein isolate was investigated given the ability to encapsulate cobalamin (vitamin B12) in a blend with pullulan by electrospinning method. The starting blend solutions were characterized regarding the key factors that influence the formation of the fibers: viscosity, charge density carried by the jet, and surface tension. The results showed that the addition of the protein isolate (1% w/v) increased the conductivity of the pullulan solution (5% w/v), from 0.163 mS/cm to 1.420 mS/cm and the viscosity from 1.74±0.07 to 8.34±0.09 mPas. Cobalamin (at a concentration of 0.3 mg/mL) decreased the conductivity (to 0.978 mS/cm) and slightly increased the surface tension and viscosity of the final solution. SEM micrographs showed the formation of beads-on-fiber structures after the electro-hydrodynamic processing of the solutions. The protein caused the reduction of the beads compared to the beads obtained from neat pullulan (176.68 nm vs. 357.52 nm), while the mean fiber diameter was not affected (~22.5 nm). The combination of biopolymer pullulan and protein-rich pumpkin leaf extract has shown the properties of a potential carrier for the model vitamin

References

Aceituno-Medina, M., Mendoza, S., Lagaron, J. M., & López-Rubio, A. (2013). Development and characterization of food-grade electrospun fibers from amaranth protein and pullulan blends. Food Research International, 54(1), 667-674. https://doi.org/10.1016/j.foodres.2013.07.055
Aguilar-Vázquez, G., Loarca-Piña, G., Figueroa-Cárdenas, J. D., & Mendoza, S. (2018). Electrospun fibers from blends of pea (Pisum sativum) protein and pullulan. Food Hydrocolloids, 83, 173-181. https://doi.org/10.1016/j.foodhyd.2018.04.051.
Balanč, B., Salević-Jelić, A., Đorđević, V., Bugarski, B., Nedović, V., Petrović, P., & Knežević-Jugović, Z. (2024). The Application of Protein Concentrate Obtained from Green Leaf Biomass in Structuring Nanofibers for Delivery of Vitamin B12. Foods, 13(10), 1576. https://doi.org/10.3390/foods13101576.
Bhardwaj, N., & Kundu, S. C. (2010). Electrospinning: A fascinating fiber fabrication technique. Biotechnology advances, 28(3), 325-347. https://doi.org/10.1016/j.biotechadv.2010.01.004.
Busolo, M.A., Castro, S., Lagaron, J.M. (2017): Electro-hydrodynamic processes (electrospinning and electrospraying): nonthermal processes for micro- and nanoencapsulation. In Krokida, M. (Ed.), Thermal and nonthermal encapsulation methods. (pp. 115-136). CRC Press, Taylor & Francis Group, Boca Raton, Florida, USA.
Drosou, C., Krokida, M., & Biliaderis, C. G. (2018). Composite pullulan-whey protein nanofibers made by electrospinning: Impact of process parameters on fiber morphology and physical properties. Food Hydrocolloids, 77, 726-735. https://doi.org/10.1016/j.foodhyd.2017.11.014.
Echegoyen, Y., Fabra, M. J., Castro-Mayorga, J. L., Cherpinski, A., & Lagaron, J. M. (2017). High throughput electro-hydrodynamic processing in food encapsulation and food packaging applications. Trends in Food Science & Technology, 60, 71-79. https://doi.org/10.1016/j.tifs.2016.10.019.
Fong, H., Chun, I., & Reneker, D. H. (1999). Beaded nanofibers formed during electrospinning. Polymer, 40(16), 4585-4592. https://doi.org/10.1016/S0032-3861(99)00068-3.
Kamali, S., Yavarmanesh, M., Najafi, M. B. H., & Koocheki, A. (2022). Development of whey protein concentrate/pullulan composite films containing bacteriophage A511: Functional properties and anti-Listerial effects during storage. Food Packaging and Shelf Life, 33, 100902. https://doi.org/10.1016/j.fpsl.2022.100902.
Ma, J., Xu, C., Yu, H., Feng, Z., Yu, W., Gu, L., ... & Hou, J. (2021). Electro-encapsulation of probiotics in gum Arabic-pullulan blend nanofibres using electrospinning technology. Food Hydrocolloids, 111, 106381. https://doi.org/10.1016/j.foodhyd.2020.106381.
Nieuwland, M., Geerdink, P., Brier, P., Van Den Eijnden, P., Henket, J. T., Langelaan, M. L., ... & Martin, A. H. (2014). Reprint of" Food-grade electrospinning of proteins". Innovative food science & emerging technologies, 24, 138-144. https://doi.org/10.1016/j.ifset.2014.07.006.
Prasad, P., Guru, G. S., Shivakumar, H. R., & Sheshappa Rai, K. (2012). Investigation on miscibility of sodium alginate/pullulan blends. Journal of Polymers and the Environment, 20, 887-893. https://doi.org/10.1007/s10924-012-0427-4
Schiffman, J. D. & Schauer, C. L. (2088) A review: Electrospinning of biopolymer nanofibers and their applications. Polymer Reviews, 48, 317–352. https://doi.org/10.1080/15583720802022182.
Tenorio, A. T., Gieteling, J., De Jong, G. A., Boom, R. M., & Van Der Goot, A. J. (2016). Recovery of protein from green leaves: Overview of crucial steps for utilisation. Food Chemistry, 203, 402-408. https://doi.org/10.1016/j.foodchem.2016.02.092.
Uyar, T. & Besenbacher, F. (2008) Electrospinning of uniform polystyrene fibers: The effect of solvent conductivity. Polymer 49, 5336–5343. https://doi.org/10.1016/j.polymer.2008.09.025.
Wang, Y., Guo, Z., Qian, Y., Zhang, Z., Lyu, L., Wang, Y., & Ye, F. (2019). Study on the electrospinning of gelatin/pullulan composite nanofibers. Polymers, 11(9), 1424. https://doi.org/10.3390/polym11091424.
Xiao, Q., & Lim, L.T. (2018) Pullulan-alginate fibers produced using free surface electrospinning. International Journal of Biological Macromolecules, 112 809–817. https://doi.org/10.1016/j.ijbiomac.2018.02.005.
Zhao, Z., Xiong, X., Zhou, H., & Xiao, Q. (2019). Effect of lactoferrin on physicochemical properties and microstructure of pullulan‐based edible films. Journal of the Science of Food and Agriculture, 99(8), 4150-4157. https://doi.org/10.1002/jsfa.9645.