COMPARATIVE ANALYSIS OF ANTHROPOMETRIC DATA OF NORTHERN AND SOUTHERN HAUSA IN NIGERIA

Adekunle Kolawole; Peter P. Ikubanni; Adekunle A. Adeleke; Olayinka O. Agboola; Afeez A Alebiosu

doi:10.5937/jaes17-20376

Adekunle Kolawole University of Ibadan; Landmark University
Peter P. Ikubanni Landmark University
Adekunle A. Adeleke University of Ilorin
Olayinka O. Agboola Landmark University
Afeez A Alebiosu University of Ibadan

DOI: https://doi.org/10.5937/jaes17-20376

Keywords: Statistical Analysis, Industrial engineering, Ergonomics, Body mass index, Anthropometric dimension,

Abstract

The article aims at obtaining some anthropometric dimensions of Hausa tribes living in both the northern and southern part of Nigeria for the usage of designers of furniture and work stations. Samples of 216 volunteered participants were randomly selected for the study with age range of 16 and 35 years. Sixteen (16) anthropometric dimensions were taken. The descriptive statistical analysis of mean, standard deviations, minimum values, maximum values, 1^st, 5^th, 50^th, 90^th, 95^th and 99^th percentiles were obtained using SPSS 16.0 statistical package. However, ten selected anthropometric dimensions for T-Test was conducted on the measurements for comparison of all the participants from the north and south; on male participants from north and the south; and on female participants from north and south, at 0.05 level of significance. Most especially for the females, the results showed that there were significant differences in the height, overhead reach, arm span, sitting height, knee height and head length between the Hausa females living in the north and south. Hence, there is the need to design equipment and workplaces which must take into consideration data of the proposed users.

References

International Ergonomics Association (IEA). (2000). An official definition of ergonomics. Available at http://www.iea.cc/ergonomics/ accessed on 12/12/2018.

Nemeth, C.P. (2004). Human Factors Methods for Design: Making systems Human-Central. Boca Raton: CRC Press. 200NW Corporate Blud..

Veljković, Z., Spasojević-Brkić, V., & Brkić, A. (2015). Crane cabin’s safety and ergonomics characteristics evaluation based on data collected in Sweden port. Journal of Applied Engineering Science, vol. 13, no. 4, 299-306.

National Health And Nutrition Examination Survey (NHANES). (2005). Anthropometry And Physical Activity Monitor Procedures Manual. Available at https://www.cdc.gov/nchs/data/nhanes/nhanes_05_06/BM.pdf.

Barroso, M.P., Arezes, P.M., da Costa, L.G., & Sérgio, M.A. (2005). Anthropometric study of Portuguese workers. International Journal of Industrial Ergonomics, 35(5), 401-410. doi:10.1016/j.ergon.2004.10.005

Wagner, D., Birt, J.A., Snyder, M., & Duncanson, J.P. (1996). Anthropometry and Biomechanics. In Human factors Design Guide. FAA William J. Hughes Technical Center; 14, pp: 18-30.

Nunes, I.L. (2012). Fuzzy systems to support industrial engineering management. Journal of Applied Engineering Science, vol. 10, no. 3, 143-146.

Ismaila, O. (2009). Anthropometric data of hand, foot and ear of University students in Nigeria. Leonardo Journal of Sciences, vol. 15, 15-20.

Ismaila, S.O., Akanbi, O.G., & Oderinu, S.O. (2010). Anthropometric survey and appraisal of furniture for Nigerian primary school pupils. E-Journal of Science and Technology, vol. 4, no. 5, 29-36.

Ikubanni, P.P., & Akande, K.A. (2015). Hand index classification of some selected male in Ilorin, North-central Nigeria. E-Journal of Science and Technology, vol. 10, no. 1, 65-69.

Ikubanni, P.P., Akande, K.A., & Agboola, O.O. (2018). Application of anthropometric approach in lessening disorders and stress-related issues. Kathmandu University Journal of Science, Engineering and Technology, 13(1), 45-55. doi:10.3126/kuset.v13i1.21256

Okunribido, O.O. (2000). A survey of hand anthropometry of female rural farm workers in Ibadan, Western Nigeria. Ergonomics, 43(2), 282-292. doi:10.1080/001401300184611

Ajayeoba, A.O., Oladosu, K.O., Adekoya, L.O., & Olajimi, A.O. (2016). Ergonomics evaluation and establishment of suitable classroom furniture design specifications for secondary school children in south-west Nigeria. Innovative System and Design Engineering, vol. 7, no. 3, 15-19.

Igboanugo, A., Egharevba, F., & Ibhadode, A. (2002). Anthropometric survey of Nigeria adult working class. Nigerian Journal of Engineering Management, vol. 3, no. 2, 7-20.

Onawumi, A.S., Adebiyi, K.A., Fajobi, M., & Oke, E.O. (2016). Development of predictive models for some anthropometric dimensions of Nigerian occupational bus operators. European Journal of Science and Technology, vol. 5, no. 5, 12-27.

Kolawole, A., Charles-Owaba, O., & Ajisegiri, G. (2009). Anthropometric variability study of two Nigerian ethnic groups. Ergonomics SA, vol. 21, no. 1, 39-51.

Onuoha, S.N., Okafor, M.C., & Oduma, O. (2013). Foot and head anthropometry of 18-30 years old Nigerian polytechnic students. International Journal of Current Engineering and Technology, vol. 3, no. 2, 352-335.