A CONTRIBITION TO RESEARCH OF THE INFLUENCE OF DEGRADATION OF VEHICLE VIBRATION PARAMETERS ON THERMAL LOAD OF SHOCK ABSORBERS
Abstract
Summary: Dynamic simulation, based on modelling, has a significant role during to the process of vehicle development. It is especially important in the first stages of vehicle design, when relevant parameters are to be defined. In practice, it is commonly assumed that vehicle vibration parameters are invariable, what is basically not true. Many investigations have shown that vibration parameters degrade in service conditions, what consquently leads to the variation of dynamic characteristics of a vehicle. This paper attempts to indicate, on the basis of the preliminary results, a need to introduce these variations, caused by the thermal impact, in the early stages of vehicle design through the adequate vehicle modelling.
References
/1/ Atkins, P. (2010), The Laws of Thermodynamics (A Very Short Introduction), Oxford.
/2/ Belingardi, G., Demić, M. (2009), A possible model for shock absorber by using the „Black box“ method, Journal of Applied Engineering Science, VII/4, pp. 45-53.
/3/ Bendat, J. and Piersol, A., (1980), Engineering applications of correlation and spectral analysis, John Wiley and Sons, New York.
/4/ Bendat, J. and Piersol, A., (2000), Random data analysis and measurement, John Wiley and Sons, London.
/5/ Bendat, J., Nonlinear Systems - Techniques and Applications, (1998), John Wiley and Sons, London.
/6/ Bojić, М., (2011), Thermodynamics (in Serbian), Mechanical Engineering Faculty, Kragujevac.
/7/ Demić, M. (1997), The optimization of vehicle vibration systems (in Serbian), Mechanical Engineering Faculty, Kragujevac.
/8/ Demić, M., (2004), Design of passenger cars (in Serbian), Mechanical Engineering Faculty in Kragujevac.
/9/ Demić, M. (1999), The definition of the tires limit of admissible nonuniformity by using the vehicle vibratory model. Vehicle System Dynamics 31 (3), pp. 183-211
/10/ Demić, M., (1994), Optimization of Vehicles Elasto-Damping Element Characteristics from the Aspect of Ride Comfort, Vehicle System Dynamics, Vol. 23, pp.351-377.
/11/ Demić, M. (1996), Optimization of Characteristics of Elasto-Damping Elements from the Aspect of Oscillatory Comfort and Vehicle Handling, Int. J. of Vehicle Design, Vol. 17, No 1.
/12/ Demić, M., Diligenski, Đ., Demić, I., Demić, M. (2006), A method of vehicle active suspension design, Forschung Im Ingenieurwessen, 5, 70: DOI 10.1007/s10010-06-0025-, pp 145-158.
/13/ Demić, M., Belingardi, G. (2010), A Contribution to shock absorber modelling and Analysis of their Influence on Vehicle ride Charakteristics, Journal of Middle European Construction and Design of Cars (MECCA), 01, pp 6-17.
/14/ Demić, M., (2003) Analsigdem Software for signal analysis, www.ptt.yu/korisnici/i/m/imizm034/index.swf.
/15/ Demić, M. (2003), Demparcoh Software, www.ptt.yu/korisnici/i/m/imizm034/index.swf
/16/ Demić, M., Diligenski, Đ., (2012), A Contribution to Research of Degradation of Characteristics of Vibration Parameters on Vibration Aspect of Vehicle Comfort, Journal of Applied Engineering Science, 10, No 4, pp.185-190.
/17/ Genta A. (2003), Motor Vehicle Dynamics. Politecniko di Torino.
/18/ Gillespie T. (1992), Fundamentals of Vehicle Dynamics. SAE, Warrendale.
/19/ Magneti Marelli, (2012), Informations.
/20/ Miliken WF, Miliken D.L., (1995), Race Car Vehicle Dynamics. SAE, Warrendale, 1995.
/21/ Ilić, G., Radojković, N., Stojanović, I., (1996), Thermodynamics II – The basics of heat transfer (in Serbian), Mechanical Engineering Faculty, Niš.
/22/ Malić D., (1972), Thermodynamics and thermotechnics (in Serbian), IP „Gradjevinska knjiga“, Belgrade.
/23/ Milinčić D., Vasiljević B., Djordjević R., (1984), Problems with heat transfer (in Serbian), IP Gradjevinska knjiga“, Belgrade.
/24/ Marić, M., (2002), Thermal Science - thermodynamics, heat transfer, combustion (in Serbian). University of Novi Sad, Faculty of Technical Sciences.
/25/ Milinčić D., Voronjec D., (1991), Thermodynamics (in Serbian), Mechanical Engineering Faculty, Belgrade 1991.
/26/ Mohd Sh., Mohd. S., Erlifi H., Nor, M. M., (2008), Experimental heat transfer study on the shock absorber operation”, International Conference on Science & Technology: Applications in Industry & Education,
/27/ Moran, M.J. et al., (2010), Fundamentals of Engineering Thermodynamics, Wiley.
/28/ Mitschke, M., (1997), Kraftfahrzeugkonstruktion, Teil D., TU Braunschweig, Forlesung.
/29/ Fermi, E., (2011), Thermodynamics, Dover Books on Physics.
/30/ Riesenburg, O., (1970), „Beitrag zur Klärung der Vorgänge in einem hydraulischen Schwingungsdämpfer“, Dissertation TU Braunschweig.
/31/ Rajamani, R., (2005), Vehicle Dynamics and Control, University of Minesota.
/32/ Šelmić, R., (1986), Technical thermodynamics (in Serbian), Naučna knjiga, Belgrade.
/33/ Zastava informations (1977-2010) (in Serbian).
