RIGID PAVEMENT PLANNING IN TRAFFIC: CASE STUDY IN CIHERANG ROAD AND PEMUDA ROAD, BOGOR REGENCY, INDONESIA

  • Syaiful Syaiful Civil Engineering Departement Ibn Khaldun University Bogor, Indonesia
  • Hendra Rusfana Civil Engineering Departement Ibn Khaldun University Bogor, Indonesia
Keywords: road damage, rigid pavement planning, Bina Marga Method, road geometric

Abstract


Rd Ciherang and Rd Pemuda, Dramaga Subdistrict, Bogor Regency, are located in a densely populated area which connects Rd Raya Dramaga and Rd Dramaga Ring. The existing condition of the road is in the form of flexible pavement or asphalt, but there are several points that have been damaged. Damage is in the form of longitudinal cracking, cracks and holes. The purpose of planning rigid pavement is to improve the surface layer of the road smoother and provide comfort, smoothness for road users. The method used is to calculate the thickness of the plate and geometric analysis of the road. The basis for choosing rigid pavement is due to its location in the mountains and poor subgrade conditions. The basic condition of rigid pavement strongly supports the movement of heavy vehicles in locations which are planned for the outer ring road. Because the geometric conditions of the road are winding and up and down, Spiral-Circle-Spiral and Full-Cyrcle planning is highly recommended. Fatik and erosion damage must be less than 100%. This is to get the results of the calculations that have been done. Rigid Pavement is planned and geometric analysis to provide comfort and smoothness for road users. In this study, a pavement thickness of 18.5cm was produced from the results of calculations using Bina Marga Method. Transverse connection using dowel diameter 25mm, length 450mm, spacing 300mm. Longitudinal connection using tie bars with a diameter of 16mm, a length of 700mm and a distance of 600mm. The results of the geometric analysis obtained five horizontal alignment forms, namely the spiral-circle-spiral (SCS) PI-1 bend with a bend length of 153.35m. The PI-2 bend is spiral-circle-spiral (SCS) with a bend length of 233.21m. The PI-3 bend is full circle (FC) type with a bend length of 174.19m. The PI-4 bend is full circle (FC) type with a bend length of 68.11m. Full circle (FC) type PI-5 bend with a bend length of 66.47m.

References

AASHTO 2001. AASHTO A Policy on Geometric Design of Highways and Streets.

Ananda Putri, Moch Ali Ma'sum, Bagus Hario Setiajo, Wahyudi Kushardjoko, 2017, Evaluation of the Capacity of Parking Space Requirement of Panti Wilasa Citarum Semarang Hospital, Jurnal Karya Teknik Sipil, V. 6 No. 1 Year 2017 h. 70-82 Online at: http://ejournal-s1.undip.ac.id/index.php/jkts

Department of Public Works Directorate General of Bina Marga, 1997. Geometric Planning Procedures for Intercity Roads, Department of Public Works, Jakarta.

Department of Transportation, 1992, Directorate General of Land Transportation. 1992. Law of the Republic of Indonesia no. 14 of 1992 on Road Traffic and Transportation. Jakarta.

Fakhruriza M. Pradana, 2016. Planning Of Thick Layers of Rigid Pavement With Bina Marga Method 2003 and AASHTO Method 1993 (Case Study: West Cilegon Toll Road Access). Symposium XIX FSTPT, Islamic University of Indonesia, Yogyakarta.

R. 2011, Fiscal Area Parking Space Capacity Analysis FIP, FIS, FE and FH State University of Semarang, Unnes, Semarang.

HCM/Highway Capacity Manual, 1985. Transportation Research Board.

Hendarsin L. Shirley, 2000. Highway Engineering Planning. Bandung State Polytechnic, Department of Civil Engineering, Bandung.

Hikmah Ainun, 2016. Rigid Pavement Planning of Purwodadi–Kudus Ruas198, State University of Semarang, Semarang.

Hobbs, F.D. 1995. Traffic and Engineering, Second Edition. Translation by Suprapto TM and Waldjono. Publisher Gajah Mada Press. Yogyakarta.

Juang Akbardin, Danang Parikesit, Bambang Riyanto, Agus Taufik Mulyono and Syaiful Syaiful. 2020. Modeling of trips assignment analysis for roads network system based on transportation needs of export commodity. ARPN Journal of Engineering and Applied Science. 15(21): 2463-2470. http://www.arpnjournals.org/jeas/research_papers/rp_2020/jeas_1120_8379.pdf

Kholis Hapsari Pratiwi & Ika Widyastuti. 2017. Geometric Planning for Toll Road Ramp (Case Study: Kediri-Kertosono Toll Road. Thesis. Bogor: Universitas Brawijaya

Kustiadi Dede, 2017. Study of Rigid Pavement With Bina Marga Method 2002 (Case Study: Jl. Tegallega-Bogor City), Thesis, Ibn Khaldun University Bogor, Bogor.

Ministry of Public Works Directorate General of Highways. 2009. Freeway Geometry for Toll Road No.007/BM/2009. Jakarta: Ministry of Public Works Directorate General of Highways.

Ministry of Transportation, 1996, Decree of the Director General of Land Transportation Number: 272/HK.105/DRJD/96 dated April 8, 1996 on Technical Guidelines for the Implementation of Parking Facility, Jakarta.

Munawar, A. 2004, Computer Program for Traffic Analysis. Betta Offset. Yogyakarta.

Mubarak, M., Rulhendri, R., & Syaiful, S. 2020. PERENCANAAN PENINGKATAN PERKERASAN JALAN BETON PADA RUAS JALAN BABAKAN TENGAH KABUPATEN BOGOR. ASTONJADRO: Jurnal Rekayasa Sipil, 9(1), hal.. https://doi.org/10.32832/astonjadro.v9i1.2694 (Indonesian).

Oppenlender J.C and P.C Box. 1976. Manual of Trafic Engineering Studies.Institute of Transportation Engineering, Washington DC.

RTRW Kabupaten Bogor 2010-2030, Bappeda Kabupaten Bogor. (Indonesian)

Pd T-14-2003, Planning pavement concrete Cement Road. Department of Settlements and Regional Prasana.

Rigi Muharam, 2019. PERENCANAAN TEBAL LAPIS PERKERASAN KAKU PADA RUAS JALAN KAPTEN DASUKI BAKRI. ASTONJADRO: Jurnal Rekayasa Sipil, 8(2), hal.57-69. http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO/article/view/2617 (Indonesian).

R, Nurdiansyah.N, 2016. PERENCANAAN PERKERASAN DAN PENINGKATAN GEOMETRIK JALAN. ASTONJADRO: Jurnal Rekayasa Sipil, 5(1), hal.1-10. http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO/article/view/829 (Indonesian).

Road Geometric Planning, 1970. (Standard Specifications for Geometric Design of Rural Highways) Regulations, Directorate General of Highways, Ministry of Public Works and Housing No. 13/1970.

2.3.28.1988. 1988. Heavy Pavement Planning Guidelines, Bina Marga Ministry of Public Works Jakarta.

Syaiful, S., & Elvira, Y. (2017). Case Study On Use Area Parking At New Market City Shopping Center Bogor. IJTI (International Journal Of Transportation And Infrastructure), 1(1), 34-40. Retrieved from http://jurnal.narotama.ac.id/index.php/ijti/article/view/330

Syaiful, Syaiful. 2017, Engineering model of traffic and transportation safety with pattern of cooperation between sustainable region in Bogor, MATEC Web Conf., 138 (2017) 07008 DOI: https://doi.org/10.1051/matecconf/201713807008

Syaiful Syaiful, Doni Hariyadi, 2019. Case Study on Sustainable T-Jungtion Cibinong City Mall (CCM) in Bogor Indonesia. ARPN Journal of Engineering and Applied Science. 14(17): 2960-2971. http://www.arpnjournals.org/jeas/research_papers/rp_2019/jeas_0919_7895.pdf

Syaiful Syaiful, Yogi Pratama. 2019, Sustainable Studies about General Public Transport Performance in the City of Bogor. ARPN Journal of Engineering and Applied Science. 14(18): 3241-3247. http://www.arpnjournals.org/jeas/research_papers/rp_2019/jeas_0919_7925.pdf

Syaiful Syaiful, Sri Wiwoho Mudjanarko, 2019, Noise of Motor Vehicles at from of Baiturrahman Great Mosque Semarang City, The Spirit Of Society Journal, 2 (2) March 2019. https://jurnal.narotama.ac.id/index.php/scj/article/view/902

Syaiful Syaiful, 2020, Analysis on the Addition of Fiber the Strong Bending Mixed Concrete, ARPN Journal of Engineering and Applied Science. 15(6): 724-729. http://www.arpnjournals.org/jeas/research_papers/rp_2020/jeas_0320_8152.pdf

Syaiful Syaiful, Mikhael Yuliantino (2017) THE STUDY OF LAND PARKING MALL BOGOR INDAH PLAZA Proceedings of the Conference on Global Research on Sustainable Transport (GROST 2017) ISSN: 2352-5401, volume: 147 ISBN 978-94-6252-449-1 doi:10.2991/grost-17.2018.25 p. 286-303 https://www.atlantispress.com/proceedings/grost-17/25889389

Syaiful Syaiful and Lian Lasmana, 2020, Study about level of railway road damage railways with sustainable PCI method, ARPN Journal of Engineering and Applied Science. 15(8): 962-968. http://www.arpnjournals.org/jeas/research_papers/rp_2020/jeas_0420_8184.pdf

Syaiful Syaiful, Iswahyudi Iswahyudi. 2020. Noise Caused by the Volume of Public Transport and Private Transportation during COVID-19, Journal of Southwest Jiaotong University 55 (5), pp 1-12. http://www.jsju.org/index.php/journal/article/view/741/735

Syaiful Syaiful, Noor Wahid. 2020. A STUDY OF THE DENSITY OF MOTOR VEHICLES IN FRONT OF HOSPITAL BUNDA MARGONDA DEPOK AGAINST NOISE POLLUTION, THE SPIRIT OF SOCIETY JOURNAL 3 (2), pp 45-67. https://jurnal.narotama.ac.id/index.php/scj/article/view/1094

Syaiful Syaiful. 2020. Analysis of Motorized Vehicle Sound Pollution in front of Mall Yogya Plaza Bogor, INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH 9 (8), pp 400-405. https://www.ijstr.org/final-print/aug2020/Analysis-Of-Motorized-Vehicle-Sound-Pollutionin-Front-Of-Mall-Yogya-Plaza-Bogor.pdf

Syaiful Syaiful, Juang Akbardin. 2020. Civil Engineering Students‘ Conceptual Understanding On Centrifugal Force Implementation Through Geometrical Design Of Inter-City Road In Indonesia. INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH 9 (10), pp 345-349. https://www.ijstr.org/final-print/oct2020/Civil-Engineering-Students-Conceptual-Understanding-On-Centrifugal-Force-Implementation-Through-Geometrical-Design-Of-Inter-city-Road-In-Indonesia.pdf

Syaiful Syaiful, Ahmad Fadly. 2020. ANALYSIS OF THE EFFECTIVENESS OF BUS SERVICES OUTSIDE OF CAMPUS IPB DRAMAGA BOGOR. ASTONJADRO: JURNAL REKAYASA SIPIL 9 (2), pp 173-186. http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO/article/view/3597

Syaiful Syaiful, Soni Sutarsa. 2020. Analysis of Sustainable Financial Investment Feasibility Study on Housing Casase Cetrene. Proceeding of the 5th NA International Conference on Industrial Engineering and Operations Management Detroit, Michigan, USA, August 10 - 14, 2020, pp 3631-3639. http://www.ieomsociety.org/detroit2020/papers/716.pdf

B, Rulhendri.R, 2015. PERENCANAAN GEOMETRIK JALAN DAN TEBAL PERKERASAN LENTUR PADA RUAS JALAN GARENDONG-JANALA. ASTONJADRO: Jurnal Rekayasa Sipil, 4(1), hal.29-35. http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO/article/view/820 (Indonesian).

Sukirman, Silvia. 1999. Basics of Road Geometric Planning. Bandung: Nova Publisher.

T, Syaiful. S, Rulhendri. R. 2019. PERENCANAAN TEBAL LAPIS PERKERASAN KAKU PADA RUAS JALAN KAPTEN DASUKI BAKRI. ASTONJADRO: Jurnal Rekayasa Sipil, 8(2), hal.70-79. http://ejournal.uika-bogor.ac.id/index.php/ASTONJADRO/article/view/2628 (Indonesian).

Syaiful Syaiful, 2021, Additional Betonmix to Increase the Strength of Concrete Press, ARPN Journal of Engineering and Applied Science. 16(15): 1583-1589. http://www.arpnjournals.org/jeas/research_papers/rp_2021/jeas_0821_8652.pdf

Syaiful Syaiful, Fery Syahrulloh, 2021, Geometric planning of Toll Roads on Ringroad road development, ARPN Journal of Engineering and Applied Science. 16(18). http://www.arpnjournals.com/jeas/volume_18_2021.htm

AutoCAD Version 2010.

Kementerian Pekerjaan Umum. 2003. Manual Desain Perkerasan Jalan. Direktorat Jenderal Bina Marga, Jakarta (Indonesian).

Published
2022/04/25
Section
Original Scientific Paper