OPTIMUM POWER FOR ER-70S-2 AND SS400 DISSIMILAR CDW JOINT

Djarot B. Darmadi; Femiana Gapsari; Steamy Renergia Dirman; Marco Talice

doi:10.5937/jaes0-39068

Djarot B. Darmadi Mechanical Engineering Department Brawijaya University, 65145, Indonesia https://orcid.org/0000-0001-7256-6650
Femiana Gapsari Mechanical Engineering Department Brawijaya University, 65145, Indonesia
Steamy Renergia Dirman Mechanical Engineering Department Brawijaya University, 65145, Indonesia
Marco Talice PMSQUARED Engineering S.r.l.s, 09127, Italy

DOI: https://doi.org/10.5937/jaes0-39068

Keywords: capacitive discharge welding, dissimilar metal welding joints, SCC resilience, SCC susceptibility, stress corrosion cracking

Abstract

Selecting the right cutting tool material for the type of workpiece material plays a very important role in the machining process. The efficiency of the machining process is greatly influenced by this selection. The tables in the manuals or the manufacturer's instructions are commonly used documents for the selection of cutting tool materials. Within each of these document types, the cutting tool materials were described by different criteria. So, tool selection is considered as a multi-criteria decision-making activity. The values of the criteria for each type of cutting tool can be a number or a certain range. This study proposes a new method to rank and select cutting tools. First, a ranking of the solutions for each criterion will be performed. This ranking is based on the mean value of the criteria in each solution. Therefore, this method is called “Ranking the Solutions based on the Mean Value of Criteria - RSMVC”. The RSMVC method was proven to be a highly reliable method for ranking the cutting tool materials. These results were successfully verified when solving the problems in different cases of cutter material selection.

References

Srinivasa Reddy Vempati, K. Brahma Raju, K. Venkata Subbaiah (2018). Optimization of welding parameters of Ti6Al4V cruciform shape weld joint to improve weld strength based on Taguchi method. Materials Today: Proceedings 5, pp. 4948-4957.

G. Satyanarayana, K.L. Narayana, B. Nageswara Rao (2019). Optimal laser welding process and expected weld bead profile for P92 steel. SN Applied Sciences, 1:1291, https://doi.org/10.1007/s42452-019-1333-3.

L.M. Ebhota and C.E. Etin-Osa (2021). Prediction of optimum weld tensile strength using response surface methodology. European Journal of Engineering and Technology Research, Vol. 6, Issue 3, pp. 146-149, http://dx.doi.org/10.24018/ejers.2021.6.3.2422.

Xinjiang Fei and Zhifeng Wu (2018). Research of temperature and microstructure in friction stir welding of Q235 steel with laser-assisted heating. Results in Physics, 11, pp. 1048 – 1051, https://doi.org/10.1016/j.rinp.2018.11.039.

Ugrasen G, Bharath G, Kishor Kumar G, Sagar R, Shivu P R, Keshavamurthy R (2018). Optimization of process parameters for Al6061-Al7075 alloys in friction stir welding using Taguchi’s technique. Materials Today, Proceeding 5, pp. 3027-3035.

Shuja Ahmed and Probir Saha (2020). Selection of optimal process parameters and assessment of its effect in micro-friction stir welding of AA6061-T6 sheets. The International Journal of Advanced Manufacturing Technology, Vol. 106, 3045 – 3061, https://doi.org/10.1007/s00170-019-04840-6.

C. Manfredi and J.L. Otegui (2002). Failures by SCC in buried pipelines. Engineering Failure Analysis, Vol.9, pp. 495-509, https://doi.org/10.1016/S1350-6307(01)00032-2.

J. Wang and A. Atrens (2003). Microstructure and grain boundary microanalysis of X70 pipeline steel. Journal of Material Science, vol.38, pp.323-330, https://doi.org/10.1023/A:1021169700779.

Djarot B. Darmadi, Natanael Ardi Sugiarto, Femiana Gapsari (2018). Stress corrosion cracking at ASTM A36 plate with varied grain orientation. International Review of Mechanical Engineering, vol. 12, no. 12, pp. 987-991, https://doi.org/10.15866/ireme.v12i12.16532.

Y. Rihan, S. Ayyad and M.I. Elamy (2015). A study on the residual stresses in resistance spot welding. Journal on Materials Science, vol.3, pp. 26-30, DOI: 10.26634/jms.3.2.3504.

Jae-Seong Kim, Bo-Young Lee, Woong-Gi Hwang, and Sung-Sik Kang (2015). The effect of welding residual stress for making artificial stress corrosion crack in the STS 304 pipe. Advances in Materials Science and Engineering, 7 pages. http://dx.doi.org/10.1155/2015/932512

M. Vinoth Kumar, V. Balasubramanian, S. Rajakumar, Shaju K. Albert (2015). Stress corrosion cracking behaviour of gas tungsten arc welded super austenitic stainless steel joints. Defence Technology, vol. 11, pp. 282-291. http://dx.doi.org/10.1016/j.dt.2015.05.009.

Djarot B. Darmadi, Femiana Gapsari, Osmar Buntu Lobo and Firman Mangasa Simanjuntak (2020). Stress corrosion cracking threshold for dissimilar capacitive discharge welding joint with varied surface geometry. Applied Sciences, vol.10, 2180. DOI:10.3390/app10062180.

R Sepe, F Bollino, F Caiazzo and F Berto (2021). Stress corrosion cracking behavior of welding joint of high strength steel. IOP Conference Series: Materials Science and Engineering, vol. 1038, 012055. DOI:10.1088/1757-899X/1038/1/012055.

Jingwen Zhang, Liming Yu, Zongqing Ma, Yongchang Liu, Chenxi Liu, Huijun Li, and Hui Wang (2020). Characterization of microstructure and stress corrosion cracking susceptibility in a multi-pass austenitic stainless steel weld joint by Narrow-Gap TIG. Metallurgical and Materials Transaction A, Vol. 51A, pp. 4549 – 4562. https://doi.org/10.1007/s11661-020-05871-5.

Shun Zhang, He Xue, Shuai Wang, Yuman Sun, Fuqiang Yang and Yubiao Zhang (2021). Effect of mechanical heterogeneity on strain and stress fields at crack tips of SCC in dissimilar metal welded joints. Materials, vol. 14, 4450. https://doi.org/10.3390/ma14164450.

Yuman Sun, He Xue, Kuan Zhao, Yubiao Zhang, Youjun Zhao, Weiming Yan, and Rehmat Bashir (2022). Cracking driving force at the tip of SCC under heterogeneous material mechanics model of safe end dissimilar metal-welded joints in PWR. Science and Technology of Nuclear Installations, 6605101, 10 pages. https://doi.org/10.1155/2022/6605101.

Prabhuraj Parasuraman, Rajakumar Selvarajan, Balasubramanian Visvalingam, Rajkumar Ilamurugan and Kavitha Subra (2021). Stir zone stress corrosion cracking behavior of friction stir welded AA7075-T651 aluminum alloy joints. Corrosion Reviews, vol. 39, no. 1, pp: 55-62. https://doi.org/10.1515/corrrev-2020-0065.

Marina Cabrini, Sara Bocchi, Gianluca D’Urso, Claudio Giardini, Sergio Lorenzi, Cristian Testa and Tommaso Pastore (2020). Stress corrosion cracking of friction stir-welded AA-2024 T3 alloy. Materials, vol. 13, 2610. DOI:10.3390/ma13112610.

Shuaihao Qian, Timing Zhang, Yuhua Chen, Jilin Xie, Yi Chen, Tiesong Lin, Hongxiang Li (2022). Effect of ultrasonic impact treatment on microstructure and corrosion behavior of friction stir welding joints of 2219 aluminum alloy. Journal of Materials Research and Technology, vol. 18, pp. 1631 – 1642. https://doi.org/10.1016/j.jmrt.2022.03.068.

Mingjia Wang, Lei Chen, Xiaocui Liu, Xiaocong Ma (2014). Influence of thermal aging on the SCC susceptibility of wrought 316LN stainless steel in a high temperature water environment. Corrosion Science, vol. 81, pp. 117-124. http://dx.doi.org/10.1016/j.corsci.2013.12.011.

Nigel Scotcmer (2015). The current rise in the use of capacitor discharge welding. Welding Journal, vol. 94, no. 2, pp. 32-36.

Max-Martin Ketzel, Martin Hertel, Jorg Zchetzsche and Uwe Fussel (2019). Heat development of the contact area during capacitor discharge welding, Welding in the World, vol.63, no.5, pp. 1195-1203, DOI:10.1007/s40194-019-00744-x.

A Magda, M Burca and M Lego (2018). Research regarding capacitor discharge stud welding with tip ignition on galvanized thin sheets, IOP Conf. Series: Materials Science and Engineering, vol. 416, ART 012015, DOI:10.1088/1757-899X/416/1/012015.

Djarot B. Darmadi, Natanael Ardi Sugiarto, Femiana Gapsari (2018). Stress corrosion cracking at ASTM A36 plate with varied grain orientation. International Review of Mechanical Engineering, vol. 12, no. 12, pp. 987-991, DOI: 10.15866/ireme.v12i12.16532.

Djarot B. Darmadi, Femiana Gapsari, Osmar Buntu Lobo & Firman Mangasa Simanjuntak (2020). Stress Corrosion Cracking Threshold for Dissimilar Capacitive Discharge Welding Joint with Varied Surface Geometry. Applied Sciences, vol. 10, no. 6, DOI: 10.3390/app10062180.

Lin Shen, Hui Chen, Xiaoli Che, Yirong Wang (2020). Stress corrosion cracking behavior of laser-MIG hybrid welded 7B05-T5 aluminum alloy. Corrosion Science, Volume 165, 108417, https://doi.org/10.1016/j.corsci.2019.108417.

O. I. Zvirko, S. F. Savula, V. M. Tsependa, G. Gabetta, H. M. Nykyforchyn (2016). Stress corrosion cracking of gas pipeline steels of different strength. Procedia Strutural Integrity, vol. 2, pp. 509 – 516, https://doi.org/10.1016/j.prostr.2016.06.066.

ASM International (2006). Basic understanding of weld corrosion, Corrosion of Weldments.

Ravindra Kumar (2021). Kinetics of oxidation and surface oxide cracking behaviours of weld metal and heat affected-zones of SMA weldment in thermal cyclic environment. Materials Letters, vol. 298, 130042, https://doi.org/10.1016/j.matlet.2021.130042.

Tongjiao Chu, Yanna Nuli, Haichao Cui, Fenggui Lu (2019). Pitting behavior of welded joint and the role of carbon ring in improving corrosion resistance. Materials and Design, vol. 183, 108120. https://doi.org/10.1016/j.matdes.2019.108120.

Nobphadon Suksangpanya, Nicholas A. Yaraghi, R. Byron Pipes, David Kisailus, Pablo Zavattieri (2018). Crack twisting and toughening strategies in Bouligand architectures. International Journal of Solids and Structures, vol. 150, pp. 83-106. https://doi.org/10.1016/j.ijsolstr.2018.06.004.