PREDICTION OF GTE VANES DEFLECTION BY ANALYTICAL MODELS OF TECHNICAL AND GEOMETRIC INITIAL DATA IN CROSS LINE MILLING ON MULTI-AXIS CNC MACHINES
Abstract
In the process of milling the profile of the vanes of a gas turbine engine on multi-operational machines, a technological scheme of transverse line shaping is used. According to this scheme, the vane rotates around its own axis, it is machined with a mill with a spherical working surface, which performs rotation and interpolated axial movement. The required parameters of the surface quality of the vane airfoil profile (profile accuracy and surface roughness parameter) are provided by assigning a combination of controlled processing parameters. However, today there are no recommendations on the calculation and assignment of combinations of controlled parameters for the milling of complex-profile surfaces, which is the profile of the flow path of the GTE compressor vanes. For each line and angle of rotation of the vane, the accuracy of the vane profile will be determined depending on the amount of vane deformation, which should not exceed the tolerance for its manufacture. In the course of the analysis of geometric relationships in the contact zone of the curved profile of the flow part of the vane and the mill with a spherical working surface, dependences were obtained to determine the magnitude of the force component during milling and its projection on the Y axis, as well as the effective diameter of the mill, which are necessary to calculate the magnitude of the total deformation of the vane. A methodology is proposed and analytical models are obtained for determining and assigning a combination of controlled parameters of the milling mode that provide a given accuracy of the vane airfoil profile when developing a control program for the vane milling process on a CNC machine.
References
Krymov V.V. Yeliseyev YU.S., Zudin K.I. Proizvodstvo lopatok gazoturbinnykh dvigateley.- M.: Mashinostroyeniye, 2002. - 376s.
Poletayev V.A. Tekhnologiya avtomatizirovannogo proizvodstva lopatok gazoturbinnykh dvigateley.- M.:Mashinostroyeniye.2006.-256s.
Patent 2354508, MKN V23S3/18 Rossiyskaya Federatsiya. Sposob strochnogo frezerovaniya pera lopatki gazoturbinnogo dvigatelya/V.I. Svirshchёv, I.G. Bashkatov, D.V. Okoneshnikov, YU.N. Stepanov, S.V. Tsypkov, №2007124229/02;zayavl.27.06.2007;opubl. 10.05.2009, Byul.№13.-5s.
Sulima A.M., Noskov A.A., Serebrennikov G.Z. Osnovnyye tekhnologii proizvodstva gazoturbinnykh dvigateley. - M.: Mashinostroyeniye. 1996. 480s.
Semenchenko I.V., Mirer YA.G., Povysheniye nadezhnosti lopatok gazoturbinnykh dvigateley. - M.: Mashinostroyeniye. 1977. 160s.
Suslov A.G. Tekhnologicheskoye obespecheniye parametrov sostoyaniya poverkhnostnogo sloya detaley. - M.: Mashinostroyeniye. 1987. - 208s.
Avtomatizatsiya tekhnologii izgotovleniya gazoturbinnykh aviatsionnykh dvigateley/V.F. Bez′′yazychnyy, V.N. Krykhov, V.A. Poletayev i d.r. - M.: Mashinostroyeniye. 2005. 566s.
Tekhnologiya proizvodstva aviatsionnykh gazoturbinnykh dvigateley : uchebnoye posobiye dlya vuzov / YU. S. Yeliseyev [i dr.]. — Moskva: Mashinostroyeniye, 2003 .— 511 s.
Sposob strochnogo frezerovaniya pera lopatki gazoturbinnogo dvigatelya na mnogokoordinatnykh stankakh s CHPU: pat. 2607880 Rossiyskaya Federatsiya: MKN V23S3/18 / Svirshchёv V.I., Tarasov S.V., Tukachev D.V., Cherepanov S.E., № 2015124625; zayavl. 23.06.2015; opubl. 20.01.2017, Byul. № 2. – 5 s.
Rukovodstvo k resheniyu zadach po soprotivleniyu materialov / G.M. Itskovich, A.I. Vinokurov, L.S. Minin [i dr.]. – M.: Vyssh. shk., 1970. – 544 s.
Svirshchёv V.I., Tarasov S.V., Merezhnikov V.V. Normativnyye geometricheskiye parametry secheniy protochnoy chasti kompressornykh lopatok gazoturbinnogo dvigatelya, neobkhodimyye dlya prognozirovaniya i tekhnologicheskogo obespecheniya pokazateley kachestva // Aerokosmicheskaya tekhnika - 2017.- №49. -s.103-117.
Merezhnikov V.V., Svirshchev V.I. Opredeleniye funktsional′noy zavisimosti fakticheskogo znacheniya plecha prilozheniya normal′noy sostavlyayushchey sily frezerovaniya otnositel′no osi vrashcheniya lopatki pri poputnom poperechnom strochnom frezerovanii protochnoy chasti kompressornykh lopatok GTD na stankakh s CHPU. Nauchnyy zhurnal «Innovatsionnyye nauchnyye issledovaniya». Ufa, №2-1(16) 2022. s. 23-37.
Merezhnikov V.V. Analiz geometricheskikh svyazey v zone kontakta frezy so sfericheskoy rabochey poverkhnost′yu i krivolineynym profilem protochnoy chasti kompressornykh lopatok GTD i opredeleniye funktsional′noy zavisimosti dlya raschetnogo znacheniya plecha prilozheniya normal′noy sostavlyayushchey sily frezerovaniya pri vstrechnom poperechnom strochnom frezerovanii na stankakh s CHPU. Sbornik statey IV MNPK «Aktual′nyye nauchnyye issledovaniya». Penza: MTSNS «Nauka i prosveshcheniye»-2022. s. 101-109.
Merezhnikov V.V. Metodologiya i raschetnyye znacheniya radiusov spinki i koryta kompressornykh lopatok GTD dlya obespecheniya tochnosti protochnoy chasti pri poperechnom strochnom frezerovanii na stankakh s CHPU. Sbornik statey MNPK «Nauchnyye issledovaniya po prioritetnym napravleniyam dlya sozdaniya innovatsionnykh tekhnologiy». Kirov 2022. s. 96-99.
G.Korn, T. Korn, Spravochnik po matematike dlya nauchnykh rabotnikov i inzhenerov. M.:Nauka, 1984. 831s.
Rezhimy rezaniya trudnoobrabatyvayemykh materialov: Spravochnik/ YA.L. Gurevich, M.V. Gorokhov, V.I. Zakharov i dr. 2-e izd. pererab. i dop.-M.: Mashinostroyeniye, 1968.-240s.
Merezhnikov V.V., Svirshchev V.I. Analiticheskoye opisaniye uprugikh deformatsiy lopatki kak dvukhopornoy balki ot poperechnykh normal′nykh sostavlyayushchikh sil rezaniya pri strochnom frezerovanii. Sbornik statey MNPK «Aktual′nyye problemy teorii, metodologii i praktiki nauchnoy deyatel′nosti». Ufa 2022. s. 74-78.
Spravochnik tekhnologa-mashinostroitelya. V 2-kh t. T.2/ Pod. red. A.M. Dal′skogo, A.G. Suslova, A.G. Kosilovoy, R.K. Meshcheryakova.-5-e izd., ispravl.-M.: Mashinostroyeniye-1, 2003 g. 944 s.
