ECOLOGICAL DESIGN OPTIMIZATION OF NOZZLE PARAMETERS FOR BURNISHING OPERATION

  • Minh-Thai Le Faculty of Special Equipments, Le Quy Don Technical University, Hanoi, Vietnam
  • An-Le Van Faculty of Engineering and Technology, Nguyen Tat Thanh University, Ho Chi Minh City, Vietnam
  • Trung-Thanh Nguyen Faculty of Mechanical Engineering, Le Quy Don Technical University, Hanoi, Vietnam
  • Xuan-Ba Dang Department of Automatic Control, Ho Chi Minh City University of Technology and Education, Ho Chi Minh City, Vietnam
Keywords: nozzle parameters, design optimization, diamond burnishing, ANN, desirability approach

Abstract


The design configuration of the nozzle has a vital role in the performance measures of the machining processes. However, parameter optimizations are primary considerations of published works. This study optimizes nozzle design parameters to minimize environmental impacts and enhance the surface quality for the diamond burnishing (DB) operation. The performance measures considered are energy efficiency (ED), noise emission (NE), and the total height of profile roughness (Rt). The variables are the inner diameter (D), spraying distance (S), and pitch angle (P). The optimal Taguchi-based Bayesian regularized feed-forward neural network (TBRFFNN) was applied to propose performance models. The CRITIC approach is utilized to compute the weight values of responses, while the desirability approach (DA) is employed to select optimality. The observed results of the D, S, and P were 3.0 mm, 15 mm, and 45 deg., respectively. The ED was enhanced by 12.7%, while the Rt and NE were decreased by 24.4% and 9.1%, respectively, as compared to the original design parameters. The obtained outcomes could be utilized in the practice to boost technical characteristics. The developed optimizing approach could be employed to deal with optimization problems for different machining processes.

References

Sachin. B., Narendranath, S., Chakradhar, D. (2018). Experimental evaluation of diamond burnishing for sustainable manufacturing. Materials Research Express, vol. 5, no. 10, 106514. DOI:10.1088/2053-1591/aadb0a

Sachin. B., Narendranath, S., Chakradhar, D. (2020). Application of desirability approach to optimize the control factors in cryogenic diamond burnishing. Arabian Journal for Science and Engineering, vol. 45, 1305–1317. DOI: 10.1007/s13369-019-04326-3

Sachin. B., Narendranath, S., Chakradhar, D. (2019). Selection of Optimal Process Parameters in Sustainable Diamond Burnishing of 17-4 PH Stainless Steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 41, 219. https://doi.org/10.1007/s40430-019-1726-7

Maximov, J.T., Duncheva, G.V, Anchev, A, P, et al. (2020). Smoothing, deep, or mixed diamond burnishing of low-alloy steel components-optimization procedures.  International Journal of Advanced Manufacturing Technology, vol. 106, 1917–1929. DOI: 10.1007/s00170-019-04747-2

Maximov, J.T., Duncheva, G.V., Anchev, A, P, et al. (2020). Improvement in fatigue strength of 41cr4 steel through slide diamond burnishing. Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.  42, 197. DOI: 10.1007/s00170-019-04747-2 

Maximov, J.T., Duncheva, G.V., Anchev, A, P, et al. (2022). Improvement in wear resistance performance of CuAl8Fe3 single-phase aluminum bronze via slide diamond burnishing. Journal of Materials Engineering and Performance, vol. 31, 2466-2478. DOI: 10.1007/s40430-020-02276-8 

Maximov, J.T., Duncheva, G.V., Anchev, A, P, et al. (2021). Multi-objective optimization of the internal diamond burnishing process. Materials and Manufacturing Processes, vol. 37, no. 4, 428-436. DOI: 10.1080/10426914.2021.1981937

Felhő, C., Varga, G. (2022). CAD and FEM modelling of theoretical roughness in diamond burnishing. International Journal of Precision Engineering and Manufacturing, vol. 23, 375–384. DOI: 10.1007/s12541-022-00622-5

 Duncheva, G.V., Maximov, J.T., Anchev, A.P. et al. (2022). Improvement in surface integrity of CuAl8Fe3 bronze via diamond burnishing. International Journal of Advanced Manufacturing Technology, vol. 119, 5885–5902 (2022). DOI: 10.1007/s00170-022-08664-9

Duncheva, G.V., Maximov, J.T., Anchev, A.P. et al. (2022).  Enhancement of the wear resistance of CuAl9Fe4 sliding bearing bushings via diamond burnishing. Wear, vol. 510–511, 204491. DOI: 10.1016/j.wear.2022.204491

Maximov, J., Duncheva, G., Anchev, A., et al. (2022). Effect of diamond burnishing on fatigue behaviour of AISI 304 chromium-nickel austenitic stainless steel. Materials, vol. 15, 4768. DOI: 10.3390/ma15144768

Nguyen T.T., Le M.T. (2021). Optimization of internal burnishing operation for energy efficiency, machined quality, and noise emission. International Journal of Advanced Manufacturing Technology, vol. 114, 2115–2139. DOI: 10.1007/s00170-021-06920-y

Nguyen T.T., Le M.T. (2021). Optimization of the internal roller burnishing process for energy reduction and surface properties. Strojniški vestnik – Journal of Mechanical Engineering, vol.  67, no. 4, 167-179. DOI: 10.5545/sv-jme.2021.7106

Nguyen T.T., Nguyen T.A., Trinh Q.H. et al. (2022). Multi-performance optimization of multi-roller burnishing process in sustainable lubrication condition. Materials and Manufacturing Processes, vol. 37, no. 4, 407-427. DOI: 10.1080/10426914.2021.1962533

Nguyen T.T., Le, V.A. (2022). Machining and optimization of the external diamond burnishing operation. Materials and Manufacturing Processes. DOI: 10.1080/10426914.2022.2072880

Đinh V.D., Vu D.Q. (2022).  A mathematical model for thinning rate prediction of sheet double hydro-forming. Journal of Applied Engineering Science, Vol. 20, no. 3, 987-999. DOI: 10.5937/jaes0-35082 

Buzauova, T., Turekhanov, B., Mateshov, A., et al. (2022). Planning and experimental studies of selection the optimal welding mode by the friction of fitting rods. Journal of Applied Engineering Science, Vol. 20, no. 3, 727-735. DOI: 10.5937/jaes0-35874

Srinivas, D., Sharma, S., Gowrishankar., et al. (2022). Optimization and prediction of the hardness behaviour of LM4 + SI3N4 composites using RSM and ANN - a comparative study. Journal of Applied Engineering Science, Vol. 20, no. 4, 1214-1225. DOI: 10.5937/jaes0-38109

Hidayat, H.F., Setiawan, R., Dhelika, R., et al. (2022). Investigation of relative influence of process variables in a 10-kW downdraft fixed-bed gasifier with ann models. Journal of Applied Engineering Science, Vol. 20, no.3, 971-977 (2022). DOI: 10.5937/jaes0-34344

Published
2023/04/17
Section
Original Scientific Paper