SOFT LINING OF IMMEDIATE COMPLETE DENTURES: CASE REPORT

  • Jasmin Džaferović University of Novi Sad, Faculty of Medicine, Novi Sad, Serbia
  • Aleksandra Maletin University of Novi Sad, Faculty of Medicine, Novi Sad, Serbia
  • Milica Jeremić Knežević University of Novi Sad, Faculty of Medicine, Novi Sad, Serbia
  • Daniela Đurović Koprivica University of Novi Sad, Faculty of Medicine, Novi Sad, Serbia
Keywords: soft lining of dentures, direct denture lining, immediate dentures

Abstract


Introduction: With the placement of dental implants in edentulous patients, creating and adapting immediate dentures is crucial to allow patients to perform basic physiological functions during the osseointegration period without affecting implant healing. This report presents a case of direct soft lining of immediate complete dentures following implant placement. Case Report: Six dental implants were inserted in the upper jaw, while the patient retained natural teeth in the lower jaw. An immediate complete denture was fabricated and adjusted for the upper jaw. The prosthesis base was prepared and processed to accommodate soft lining material. Adhesive was applied to the prepared base, followed by silicone application for soft fitting onto the prosthesis base, which was then inserted into the patient's mouth. After three minutes, the denture was removed, and soft lining treatment of the immediate complete denture was completed.

Conclusion: Direct soft lining facilitated patient adaptation to the immediate prosthesis and supported safer healing and osseointegration until definitive work could be completed. The addition of a soft silicone layer reduced pressure on the residual alveolar ridge and improved adhesion of the immediate prosthesis.

References

Zafar MS. Prosthodontic aplications of Polymethyl Methacrylate (PMMA): an update. Polymers. 2020;12(10):2299. doi:10.3390/polym12102299.

Araújo CU, Basting RT. In situ evaluation of surface roughness and micromorphology of temporary soft denture liner materials at different time intervals. Gerodontology. 2018;35(1):38–44. doi:10.1111/ger.12314.

Nakhaei M, Dashti H, Ahrari F, Vasigh S, Mushtaq S, Shetty RM. Effect of different surface treatments and thermocycling on bond strength of a silicone-based denture liner to a denture base resin. J Conte Dent Practice. 2016;17(2):154–9. doi:10.5005/jp-journals-10024-1819.

Naser HJ, Abdul-Ameer FM. Evaluating the effect of lemongrass essential oil addition on some properties of heat cure acrylic soft- lining material. Medi J Babylon. 2022;19(4):646-52. doi:10.4103/MJBL.MJBL_188_22.

Kreve S, Dos Reis AC. Denture liners: a systematic review relative to adhesion and mechanical properties. ScientificWorldJournal. 2019;2019:6913080. doi: 10.1155/2019/6913080.

Spohr AR, Sarkis-Onofre R, Pereira-Cenci T, Pappen FG, Dornelles Morgental R. A systematic review: effect of hand, rotary and reciprocating instrumentation on endodontic postoperative pain. G Ital Endod. 2019;33(2):24-34. doi:10.32067/GIE.2019.33.02.03.

Stamenković D, Obradović-Đuričić K, Beloica, D, Leković, V, Ivanović, V, Pavlaović, G, Popović, G. Stomatološki materijali. Beograd: ZUNS. 2003; 463-7.

Petković DL, Krunić NS, Kostić MM, Petrović DM, Radenković GM. Strength testing of the relation between plate dentures and materials for making soft liners. Acta stomatologica Naissi. 2012;28(66):1171-9. doi: 10.5937/asn1266171P

Ariyani, Syafrinani, Chairunnisa R, Febriani. The effect of surfave treatment an thermocycling on bond strength between silicon soft denture lining and acrylic resin denture base. Journal of Pharmaceutical Negative Results. 2023; 14(3):2943-52. doi: 10.47750/pnr.2023.14.03.369.

Chladek G, Nowak M, Pakieła W, Barszczewska-Rybarek I, Zmudzki J, Mertas A. The effect of exposure to Candida Albicans suspension on the properties of silicone dental soft lining material. Materials. 2024; 17(3):723. doi: 10.3390/ma17030723

Published
2024/04/28
Section
Case report