Fuzzy logic expert system for assessing the condition of the HV motor stator insulation system

  • Denis M Ilić Univerzitet u Beogradu, Elektrotehnički fakultet Elektrotehnički Institut "NIkola Tesla" Beograd
  • Mileta Žarković School of electrical engineering, University of Belgrade
  • Momčilo Milić Electrical Engineering Institute Nikola Tesla Belgrade
  • Đorđe Jovanović
  • Radmila Kališkić
  • Nikola Stanojević
Keywords: Fuzzy logic, HV motor, condition diagnostic

Abstract


During operation, the electrical insulation system (EIS) of high-voltage motors is exposed to various factors that can affect its accelerated aging. Timely knowledge of the actual state of the EIS is of great help in allocating funds for service activities and improving the reliability of the plant. The condition of the HV motor can be assessed to some extent by performing available electrical tests. A major shortcoming is the insufficiently precise and undefined criteria in the current standards, which introduces a potential error in the bias of the evaluators of the results. The paper will propose the use of a phase logic expert system for assessing the condition of EIS stators of HV motors based on the results of electrical measurements, with reference to all the benefits that automation of the process of assessment and analysis brings with it. The created expert system will fully rely on the criteria defined in the IS32 - Internal Standard of PE EPS.

References

[1] Greg C. Stone, Edward A. Boulter, Ian Culbert, Hussein Dhirani, Electrical Insulation for Rotating Machines: Design, Evaluation, Aging, Testing, and Repair, Volume 21 of IEEE Press Series on Power and Energy Systems, John Wiley & Sons, 2004, ISBN 0471682896
[2] Denis Ilić, Mileta Žarković, Zlatan Stojković " Artificial intelligence system for stator condition diagnostic", Electrical Enginering, DOI: 10.1007/s00202-021-01402-6, Septembar 2021.IEC 60505:2011, Evaluation and qualification of electrical insulation systems
[3] Rao, Burjupati “Assessment of Stator winding Insulation, PART 1 - Review of deterioration mechanisms and condition monitoring techniques” The Journal of CPRI,. ISSN 0973 -0388 (2010)
[4] IEC 60034-27-1:2017: Rotating Electrical Machines – Part 27-1: Off-line partial discharge measurements on the winding insulation, ISBN 978-2-8322-5104-1
[5] IEC 60034-27-3:2015: Rotating Electrical Machines – Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
[6] IEEE 115-2019 - IEEE Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis
[7] Internal Standard: Electrical Power Industry of Serbia – Rotatting Electrical Machines:Electric Insulation Systems (EIS) – Tests for EIS in Service – Periodic Tests, First Edition IS32/1, Oktober 2015.
Published
2021/12/30
Section
Professional Paper