Source of Stable Single-Phase Voltage to 60V, Current to 6A and Adjustable Angle between Voltage and Current from 0 to 360°
Abstract
This paper describes a realized AC voltage power supply source of 50Hz with two outputs: voltage to 60V and current to 6A, with maximum generated power of both of 10VA. A short technical description of the realized device with a structural and functional block diagram is given. The main technical characteristics, working principles and application possibilities of the device are specified. The results of the investigations on the realized device are included.
References
A. Bellini, F. Filippetti, C. Tassoni and G. Capolino, "Advances in diagnostic techniques for induction machines," IEEE Transactions on Industrial Electronics, vol. 55, no. 12, pp. 4109 - 4126, 2008.
A. Ceban, R. Pusca, R. Romary, “Study of Rotor Faults in Induction Motors Using External Magnetic Field Analysis”, IEEE trans. on Industrial Electronics, Vol. 59, No. 5, May 2012. pp 2082 – 2093.
N. M. Elkasabgy, A. R. Eastham and G. E. Dawson,” Detection of Broken Bars in the Cage Rotor on an Induction Machine”, IEEE trans. on Industry Applications, vol. 28, no. 1, January/February 1992. pp 165 - 171.
M. Benbouzid, “A Review of Induction Motors Signature Analysis as a Medium for Fault Detection”, IEEE trans. on Industrial Electronics, Vol. 47, No. 5, October 2000. pp 984 – 993.
Kliman, G.B., Koegl, R.A., Stein, J., Endicott, R.D., Madden, M.W.,"Noninvasive detection of broken rotor bars in operating induction motors",Energy Conversion, IEEE Transactions on, On page(s): 873 - 879, Volume: 3, Issue: 4, Dec. 1988.
Русов В. А., Спектральная вибродиагностика, 1996, www.vibrocenterru/book8.htm
W. R. Finley, “Troubleshooting Induction Motors”, http://www.sea.siemens.com/us/SiteCollectionDocuments/WSSResources/Internet/Products/1_10/8/TroubleshootingInductionMotors.pdf