Design of the Robust Synchronous Generator Stator Voltage Regulator Based on the Interval Plant Model

  • Đorđe M. Stojić Elektrotehnički institut Nikola Tesla, Univerzitet u Beogradu
  • Milan Milinković Elektrotehnički institut Nikola Tesla, Univerzitet u Beogradu
  • Slavko Veinović Elektrotehnički institut Nikola Tesla, Univerzitet u Beogradu
  • Dušan Joksimović Elektrotehnički institut Nikola Tesla, Univerzitet u Beogradu
  • Nemanja Milojčić Elektrotehnički institut Nikola Tesla, Univerzitet u Beogradu
  • Ilija Klasnić Elektrotehnički institut Nikola Tesla, Univerzitet u Beogradu
  • Dušan Arnautović Elektrotehnički institut Nikola Tesla, Univerzitet u Beogradu

Abstract


In this paper, a novel method for the stator voltage regulator of a synchronous generator based on the interval plant mode is presented. Namely, it is shown in the literature that, in order to design a controller for the first-order compensator, the limited number of interval plants needs to be examined. Consequently, the intervals of the plant model parameter variations used to calculate the four extreme interval plants required for the sequential PI controller design are determined. The controller is designed using frequency-domain-based techniques, while its robust performance is examined using simulation tests.

 

References

IEEE Recommended Practice for Excitation System Models for Power System Stability Studies, IEEE Std 421.5-2005, 2005.

K. Kim, R. Schaefer, “Tuning a PID Controller for a Digital Excitation Control System,” IEEE Transactions on Industry Applications, vol. 41, pp. 485-492, 2005.

K. Kim, M. J. Basler, and A. Godhwani, “Design experience with PID controllers for voltage regulation of synchronous generator,” IEEE Trans. Energy Convers., submitted for publication.

K. Kim, A. Godhwani, M. J. Basler, and T.W. Eberly, “Commissioning experience with a modern digital excitation system,” IEEE Trans. Energy Convers., vol. 13, no. 2, pp. 183–187, 1998.

R. C. Schaefer, K. Kim, and M. J. Basler, “Voltage regulator with dual PID controllers enhance power system stability,” presented at the Hydro Vision Conf., Portland, OR, 2002.

R. C. Schaefer, “Voltage regulator influence on generator stability,” presented at the Basler Electric Power Control and Protection Conf., St.Louis, 2003.

K. Kim, M. Basler, A. Godhwani, “Supplemental control in a modern digital excitation system”, IEEE Power Engineering Society Winter Meeting, pp. 603-608, 2000.

R. C. Schaefer, “Application of static excitation systems for rotating exciter replacement,” in Proc. IEEE Pulp and Paper Industry Tech. Conf., pp. 199–208, 1997.

R. C. Schaefer, “Steam turbine generator excitation system modernization,” in Proc. IEEE Pulp and Paper Industry Tech. Conf., pp.194–204, 1995.

R. Krohling, J. Rey, “Design of optimal disturbance rejection PID controllers using genetic algorithm,” IEEE Trans. Evol. Comput., vol. 5, pp. 78–82, 2001.

Y. Mitsukura, T. Yamamoto, M. Kaneda, “A design of self-tuning PID controllers using a genetic algorithm,” in Proc. Amer. Contr. Conf.,San Diego, CA, pp. 1361–1365, 1999.

T. Kawabe, T. Tagami, “A real coded genetic algorithm for matrix inequality design approach of robust PID controller with two degrees of freedom,” in Proc. 12th IEEE Int. Symp. Intell. Contr., Istanbul, Turkey, pp. 119–124, 1997.

Z. Gaing,” A Particle Swarm Optimization Approach for Optimum Design of PID Controller in AVR System,” IEEE Trans. Energy Conversion, vol. 19, no. 2, pp. 384-391, 2004.

A. Sedaghati, “A PI controller based on gain-scheduling for synchronous generator,” Turk Journal of Elec. Engin., vol.14, 2006.

I. Fialho, G. Balas, “Road Adaptive Active suspension Design Using Linear Parameter-Varying Gain-Scheduling,” IEEE Transactions on Control System Technology, vol.10, pp. 43-51, 2002.

D. Stilwell, W. Rugh, “Interpolation of Observer State Feedback Controllers for Gain Scheduling," IEEE Transactions on Automatic Control, vol. 44, pp. 1225-1229, 1999.

P. Apkarian, R. Adams, “Advanced Gain-Scheduling Techniques for Uncertain Systems, IEEE Transactions on Control System Technology, vol. 6, pp. 21-32, 1998.

C. Lee, M. Shin, N. Chung, “A Design of Gain-Scheduled Control for a Linear Parameter Varying System: An Application to Flight Control", Control Engineering Practice, vol. 9, pp. 11-21, 2001.

J. De Leon-Moralesa, K. Busawonb, S. Acha-Dazaa, “A robust observer-based controller for synchronous generators,” Electrical Power and Energy Systems, vol. 23, pp. 195-211, 2001.

M. Aman, “Fast stability achievement through fuzzy logic based non-linear excitation control of synchronous generator,” Colloquium on Humanities, Science and Engineering, 2011.

J. Cabrera-Vazquez, A. Loukianov , J. Canedo, V. Utkin, “Robust controller for synchronous generator with local load via VSC,” Electrical Power and Energy Systems, vol. 29, pp. 348–359, 2007.

A. Loukianov, J. Cañedo, L. Fridman, A. Soto-Cota, “High-Order Block Sliding-Mode Controller for a Synchronous Generator With an Exciter System,” IEEE Transactions on Industrial Electronics, vol. 58, 2011.

K. Abidi and A. Šabanovic, “Sliding-mode control for high-precision motion of a piezostage,” IEEE Trans. Ind. Electron., vol. 54, pp. 629– 637, 2007.

W.-F. Xie, “Sliding-mode-observer-based adaptive control for servo actuator with friction,” IEEE Trans. Ind. Electron., vol. 54, pp. 1517– 1527, 2007.

A. V. Topalov, G. L. Cascella, V. Giordano, F. Cupertino, and O.Kaynak, “Sliding mode neuro-adaptive control of electric drives,” IEEE Trans. Ind. Electron., vol. 54, pp. 671–679, 2007.

Y. Yildiz, A. Šabanovic, and K. Abidi, “Sliding-mode neuro-controller for uncertain systems,” IEEE Trans. Ind. Electron., vol. 54, pp. 1676–1685, 2007.

I. Jadric, D. Borojevic, M. Jadric, “Modeling and Control of a Synchronous Generator with an Active DC Load, “ IEEE Transactions on Power Electronics, vol. 15, pp. 303-311, 2000.

P. M. Anderson, A. A. Fouad, “Power System Control and Stability, “ John Wiley & Sons, 2003.

F. Saccomanno, “Electric Power Systems, Analysis and Control,” IEEE Press Series on Power Engineering, A John Wiley & Sons Publication, 2003.

B. Barmish, C. Hallot, F. Kraus, R. Tempo, “Extreme Point Results for Robust Stabilization of Interval Plants with First Order Compensators, “, IEEE Transactions on Automatic Control, vol. 37, no. 6, pp. 707-712, 1992.

R. Farkh, K. Laabidi, M. Ksouri, “Robust PI/PID controller for interval first order system with time delay,” International Journal of Modelling, Identification and Control, vol. 13, no. 1, pp 67-77, 2011.

B. Patre, P. Deore, “Robust stability and performance of interval process plant with interval time delay,” Transactions of the Institute of Measurement and Control, vol. 34, no. 5, pp. 627-634, 2012.

Published
2013/12/09
Section
Professional Paper