Investigation of Dissolution Resistance of Blank and Gas-Nitrided Carbon Steels in Stationary SAC305 Solder Alloy Melt
Abstract
The objective of the present study is to investigate the suitability of a series of gas-nitrided steels with varying C content as candidates for wettable selective soldering tool materials with enhanced lifetime. ɛ and γ’ iron-nitrides were formed by gas nitriding on quenched and tempered DC04, C45, CK60 and S103 type steels. Contact angle measurements revealed that all four nitrided steels exhibit good wetting with SAC305 solder melt. In order to investigate the dissolution reactions between the nitrided steels and the solder alloy, an equipment was assembled in which the samples were submerged into stationary SAC305 solder melt for different time durations. Evidences of dissolution reactions and other degradation processes were searched for using scanning electron microscopy and energy dispersive X-ray spectroscopy. It was observed that no Fe dissolution occurred between the samples and stationary SAC305 solder melt during continuous tests with durations up to 20 days. Furthermore, no other visible degradation reactions occurred between the samples and melt during the experiments. It was concluded that gas-nitrided steels show good wetting with Sn-based solder melts which is combined with excellent resistance against Fe dissolution in a high Sn-containing molten solder. Thus, gas-nitrided steels/iron can be potential materials for wettable selective soldering tools with improved lifetime.
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.