EFFECT OF COAL RATIO ON THE HIGH-LEAD SLAG REDUCTION PROCESS

  • Zhongtang Zhang Central South University
  • Weifeng Li Central South University
  • Jing Zhan Central South University

Abstract


The effect of coal ratio on the high-lead slag reduction process was reported in this article. The density, melting temperature, viscosity, chemical composition and phase transformation of the reducing slag at different coal ratios were investigated. The results indicated that the density and viscosity of the reducing slag and the content of lead and copper in reducing slag decreased while the content of iron, silicon, calcium and zinc in reducing slag increased as the coal ratio increased. The melting temperature of the reducing slag increased sharply when the coal ratio varied in the range of 1.5% to 3%. The technological mineralogy of the reducing slag at different coal ratios indicated that lead mainly exists in reducing slag in the form of metallic lead. The industrial verification test results showed that the average recovery rate of the lead was above 96.0%, the average lead content in the reducing slag was less than 2.0% and the average fume rate was about 12.0%.


Published
2018/10/17
How to Cite
Zhang, Z., Li, W., & Zhan, J. (2018). EFFECT OF COAL RATIO ON THE HIGH-LEAD SLAG REDUCTION PROCESS. Journal of Mining and Metallurgy, Section B: Metallurgy, 54(2), 179. Retrieved from https://aseestant.ceon.rs/index.php/jmm/article/view/16150
Issue
Vol. 54 No. 2 (2018)
Section
Original Scientific Paper

Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.

The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.

The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).

Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.

Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.

The Corresponding author agrees to inform his/her co-authors, of any of the above terms.