Copper Matte – Slag Reaction Sequences and Separation Processes in Matte Smelting
Abstract
While particle combustion and chalcopyrite oxidation in suspension smelting is well understood, few studies are available regarding the melt-melt reactions and the separation between copper matte and slag in matte smelting. In the present work, experimental investigations in air and argon atmosphere were conducted using mixture of synthetic slag and chalcopyrite concentrate. The sequential reaction and separation processes occurring in matte smelting are outlined. Possible limiting factors in the overall process are also proposed. The result of the present work forms an important foundation for future work in kinetic rate formulation of molten phase reactions between copper matte and slag in matte smelting.
References
M. I. Sanchez Devia, Mineral Processing and Extractive Metallurgy., 120 (3) (2011) 177-190.
H. M. Henao, C. Nexhip, D.P. George-Kennedy, P.C. Hayes, E. Jak, Metallurgical and Materials Transactions B, 41 (2010) 757-779.
T. Hidayat, A. Fallah-Mehrjardi, J. Chen, P. Hayes, E. Jak, Unpublished paper presented at the 9th International Copper Conferences. Kobe, Japan, 2016.
T. Hidayat, H.M. Henao, P.C. Hayes, E. Jak, Metallurgical and Materials Transactions B, 43 (2012) 1034–1045.
H.G. Kim, H.Y. Sohn, Metallurgical and Materials Transactions B, 29 (1998) 583-590.
B. Zhao, P. Hayes, E. Jak, Journal of Mining and Metallurgy, Section B: Metallurgy, 49 B (2) (2013) 153-159.
G. Roghani, Y. Takeda, K. Itagaki, Metallurgical and Materials Transaction B, 31 (2000) 705-712.
M. Nagamori, P.J. Mackey, P. Tarassoff, Metallurgical Transactions B, 6 (1975) 295-301.
P. Djordjevic, N. Mitevska, I. Mihajlovic, Dj. Nikolic, D. Manasijevic, Z. Zivkovic, Journal of Mining and Metallurgy, 28 (1) (2011) 143-151.
K. Avarmaa, H. Johto, P. Taskinen, Metallurgical and Materials Transactions B. 47 (2016) 244-255.
F.R.A. Jorgensen, Proc. Australas. Inst. Min. Metall., 288 (1983) 37-46.
P.C. Chaubal, H.Y. Sohn, N.J. Themelis, Center for Pyrometallurgy Conference on Flash Reaction Processes. Rolla, USA, 1986, pp. 17-38.
A. Jokilaakso, R. Suominen, P. Taskinen, K. Lilius, IMM Transactions, Sect. C 100 (1991) C79-90.
A. Jokilaakso, Acta Polytechnica Scandinavica, 1992, Ch205.
E. Peuraniemi, A. Jokilaakso, EPD Congress 2000, Warrendale, USA, 2000, p. 173-187.
E. Peuraniemi, J. Järvi, A. Jokilaakso, Int. Symp. Copper 99 - Cobre 99 – Vol VI , Warrendale, USA, 1999, p. 463-476.
M. Perez-Tello, H.Y. Sohn, K. St. Marie, A. Jokilaakso, Metall. Mater. Trans. B, 38 (5) (2001) 847-868.
T. Ahokainen, A. Jokilaakso, Canadian Metallurgical Quarterly. 37 (3-4) (1998) 275-283.
J. Järvi, A. Jokilaakso, Ahokainen, International Symposium on Computer Applications in Metallurgy and Materials Processing, Montreal, Canada, (1998), p. 19-29.
C.B. Solnordal, F.R.A. Jorgensen, P.T.L. Koh, A. Hunt, In Third Int. Conf. On CFD in the Minerals and Processing Industries, 10-12. December, Melbourne, Australia, 2003, p. 161-166.
M. White, R. Haywood, D.S. Ranasinghe, S. Chen, Eleventh International Conference on CFD in the Minerals and Process Industries, CSIRO, 7-9 December, Melbourne, Australia. 2015.
K.O. Fagerlund, H. Jalkanen, Metallurgical and Materials Transactions B. 31 (2000) 439-451.
Y.K. Kim, N.J. Themelis, The Reinhardt Schuhmann International Symposium: Innovative Technology And Reactor Design in Extraction Metallurgy. Warrendale, USA, 1986, p. 349-69.
J. Juusela, Flash Smelting Symposium, April 26-27, Lubin, Poland, 1973.
P. Taskinen, Miner. Proc. Extr. Metall., 120 (4) (2011) 240-246.
S.W. Ip, J.M. Toguri, Journal of Metallurgical Transactions B, 23 (1992) 305-311.
E. De Wilde, I. Bellemans, L. Zheng, M. Campforts, M. Guo, B. Blanpain, N. Moelans, K. Verbeken, Journal of Material Science and Technology (2016).
M. Nagamori, Metallurgical Transactions, 5 (1974) 531-538.
J.W. Matousek, Metallurgical and Material Transcations B, 25 (3) (1994) 463-465.
F. Ajersch, J.M. Toguri, J.M., Metallurgical Transactions. 3 (1972) 2187-2193.
A.H. Alyaser, J.K. Brimacombe, Metallurgical and Materials Transactions B 26 (1995) 25-40.
Z. Asaki, S. Ando, Y. Kondo, Metallurgical Transactions B 19 (1988) 47-52.
H. Jalkanen, Scandinavian Journal of Metallurgy, 10 (1981) 257-262.
A. Yazawa, A. Kameda, Technological Republic Tohoku University, 16 (1953) 50-58.
M.E. Schlesinger, M.J. King, K.C. Sole, W.G. Davenport, Extractive Metallurgy of Copper. Elsevier, 2011.
W.G. Davenport, E.H. Partelpoeg, Flash Smelting: Analysis, Control and Optimization.Elsevier, 1987.
V. Kress,Contrib. Mineral. Petrol., 127 (1-2) (1997) 176-186.
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.