Extracting lithium from a lithium aluminate complex by vacuum aluminothermic reduction
Abstract
The molten salt electrolysis of LiCl‒KCl is presently the primary method of producing lithium, but is costly and has environmental issues in addition to other disadvantages. Vacuum thermal reduction may be used extensively in the future because it offers low energy consumption, a high purity product and short cycle times. The present study investigated a novel process for the extraction of lithium from Li5AlO4 clinker by vacuum aluminothermic reduction. The Li5AlO4 clinker was prepared in ambient air using lithium hydroxide, alumina and calcium oxide. The results show that this process can proceed in conjunction with a lower ratio of raw materials to lithium (8.89:1) and provides lithium reduction rates in excess of 97%. In addition, the reduction slag consists mainly of 12CaO·7Al2O3, which can be used to produce aluminum hydroxide. Thus, overall, this process represents a highly efficient and environmentally-friendly means of generating lithium.
References
Harben, P.W., Edwards, G.H., Journal of Metals, 49(6)(1997)21-22.
Nicholson Piers, Evans Keith, Journal of Metals, 50(5)(1998)27-29.
Georges J. Kipouros, Donald R, Sadoway, Journal of Metals, 50(5) (1998)24-26.
X.L.Di, Q.S.Pang, Q.Li, Journal of Salt Lake Research, 13(2)(2015) 45-52. (in Chinese)
Mahi. P，Smeets.A A J，Fray D J, Charles J.A, Journal of Metals, 38(11)(1986) 20-26.
Z.Q. Lin, Kunming University of Science and Technology, Kuming, 2002, p.71-72 (in Chinese)
W.L.Chen, Kunming University of Science and Technology, Kuming, 2000, p.94 (in Chinese)
M.G. Hanson. U.S. Patent (1936), NO.:2028390.
Kroll W J, Schlechten A W., AIME, 182(1994), 266-274.
Stauffer R A, AIME. 182(1949), 275-285.
T.F. Fedorov, F.I. Shamrai, Oliver & Boyd, Edinburgh, U.K, 1964, p.126-132.
Smeets A A J, Fray D J, Trans. Inst. Min. Metall., Section C, 100(1991), 42-54.
Y.N.Dai, B.Yang, Metallurgical Industry Press, Beijing, 2000, p.338-339(in Chinese).
F.X. Fan., B.Q. Xu, Y.N. Dai, Y.C. Liu, B.Yang, D.C. Liu, Chinese Journal of Vacuum Science and Technology. 32(12)(2012)1123. (in Chinese)
Y.Z.Di，C.W. Tang，K. Zhao, N.X. Feng, Journal of Northeastern University (Natural Science), 36(10)(2015)1449-1452. (in Chinese)
Y.W.Wang, J.You, J.P.Peng, Y.Z.Di, Journal of Metals, 68(6)(2016)1728-1736.
Y.W.Wang, N.X.Feng, J.You, W.X.Hu, J.P.Peng, Y.Z.Di, Z.H.Wang. Light Metals, 2011, San Diego, USA: 205-209.
Y.Z.Di, Z.H.Wang, S.H.Tao, N.X.Feng, 4th International Symposium on High Temperature Metallurgical Processing of TMS, 2013, San Antonio, USA: 11-15.
Y.Z.Di, J.P.Peng, Y.W.Wang, N.X.Feng, Journal of Northeastern University (Natural Science), 35(5) (2014)716-720. (in Chinese)
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.