Microstructural Investigation of the Coatings Prepared by Simultaneous Aluminizing and Siliconizing Process on Gamma-TiAl
Abstract
In this research, formation of aluminide/silicide diffusion coatings on gamma-TiAl[Ti-48Al-2Nb–2Cr (at.%)] alloy using gas-phase diffusion pack cementation process has been investigated. The application of powder mixtures with various chemical compositions in the pack cementation process performed at 1000oC for 6 hours in order to achieve simultaneous diffusion of Al and Si, showed that the composition of the powder mixture could have a significant effect on the structure and thickness of the aluminide/silicide coatings. The identification and analysis of aluminide/silicide microstructures formed as a result of simultaneous diffusion of Al and Si, which was comprehensively and qualitatively done for the first time in this study, showed that the sequential mechanism is dominant in the formation of the above-mentioned coatings. Furthermore, Kirkindall phenomenon and volumetric changes caused by the formation of Ti5Si3 and Ti5Si4, were considered as the two dominant mechanisms in the formation of porous segregated structure in these coatings. In this study, as an innovative effort, the effect of decreasing the activity of Si through two approaches of reducing the amount of Si in the powder mixture and using Al-20wt.%Si alloyed powder instead of pure Al and Si depositing elements, on the microstructural modification coatings was investigated. The results showed that reducing the Si activity at the surface of the coating and, consequently, reducing the flux of active silicon atoms (JSi), has a significant effect on the formation of coating with an ideal structure.
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.