Experimental investigation and thermodynamic calculations of the Bi-Ni-Pb phase diagram

  • Dusko Minic
  • Milena Premovic
  • Nemanja Toskovic
  • Dragan Manasijevic
  • Vladan Cosovic
  • Marija Janackovic
  • Milica Tomovic

Abstract


The article presents an experimental study of a phase diagram of a ternary Bi-Ni-Pb system using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS) and X-ray powder diffraction (XRD) analysis. The investigated ternary alloys were selected from three vertical sections (x(Bi)=0.75, x(Ni)=0.1 and x(Pb)=0.9) and two isothermal sections at 100 and at 300 °C. The obtained experimental results were compared with the thermodynamically extrapolated phase diagram of the Bi-Ni-Pb ternary system based on the thermodynamic parameters for the constitutive binary systems available in literature. Reasonably close agreement between the experimental data and the calculated phase diagram was obtained.

References

N. Saunders, A. P. Miodownik: CALPHAD (Calculation of Phase Diagrams): a comprehensive guide, in: R.W. Cahn (Ed.), Pergamon Materials Series, vol. 1, Elsevier Science Ltd., London, 1998.

L. Lukas, S. G. Fries, B. Sundman: Computational Thermodynamics: CALPHAD Method, Cambridge University Press, Cambridge, UK, 2007.

W. Cao, S.-L. Chen, F. Zhang, K. Wu, Y. Yang, Y.A. Chang, R. Schmid-Fetzer, W.A.Oates: Calphad, 2009, vol. 33(2), pp. 328–342.

B. Sundman, B. Jansson, J.O. Andersson: Calphad, 1985, vol. 9, pp. 153–190.

B. Sundman, U. R. Kattner, M. Palumbo, S. Fries: Integr. Mater. Manuf. Innov., 2015, vol. 4(1), pp. 1-15.

G.P. Vassilev, K.I. Lilova, J.-C. Gachon: J. Min. Metall. Sect. B-Metall., 2007, vol. 43B(2), pp. 141-150.

V. D. Gandova: J. Min. Metall. Sect. B-Metall., 2016, vol. B52(1), pp. 113-118.

M. Premovic, D. Minic, D. Manasijevic, V. Cosovic, D. Živkovic, Irma Derviševic, Thermochim. Acta., 2015, vol. 609, pp. 61–74.

G. P. Vassilev, J. Romanowska, G. Wnuk: Intern. J. Mater. Res. (former Z. Metallkunde), 2007, vol. 98(6), pp. 468-475.

G. Vassilev, V. Gandova, P. Docheva: Cryst. Res. Technol., 2008, vol. 44(1), pp. 1-6.

A. Dinsdale, A. Watson, A. Kroupa, J. Vrestal, A. Zemanova, J. Vizdal: Atlas of Phase Diagrams for the Lead-Free Soldering, COST 531 (Lead-free Soders), Vol. 1, © COST office, 2008, ISBN 978-80-86292-28- 1, Printed in the Czech Republic.

D. Boa, I. Ansara: Thermochim.Acta., 1998, vol. 314(1), pp. 79-86.

C. P. Wang, X. J. Liu, I. Ohnuma , R. Kainuma, K. Ihida: Calphad., 2000, vol. 24(2), pp. 149-167.

International Centre for Diffraction Data, ICDD, PDF-2 2013, 12 Campus Blvd., Newtown Square, PA 19073-3273 U.S.A.

W. P. Davey: Phys. Rev., 1925, vol. 25, pp. 753-761.

E. A. Owen, E. L. Yates: Philos. Mag., 1936, vol. 7(21), pp. 809-819.

E. A. Owen, E. L. Yates: Philos. Mag., 1933, vol. 7(15), pp. 472-488.

T. Takahashi, H. K. Mao, W. A. Bassett: Science, 1969, vol. 165, pp.1352-1353.

E. L. Martinez Pineiro, B. L. Ruiz Herrera, R. Escudero, L. Bucio: Solid State Commun., 2011, vol. 151, pp. 425-429.

M. Ruck: Z. Anorg. Allg. Chem., 1999, vol. 625, pp. 2050-2054.

J. C. Zhao, Methods for Phase Diagram Determination, Elsevier, 2007.

P. Fima, A. Gazda: J. Therm. Anal. Calorim., 2013, vol. 112, pp. 731–737.

Published
2019/07/25
How to Cite
Minic, D., Premovic, M., Toskovic, N., Manasijevic, D., Cosovic, V., Janackovic, M., & Tomovic, M. (2019). Experimental investigation and thermodynamic calculations of the Bi-Ni-Pb phase diagram. Journal of Mining and Metallurgy, Section B: Metallurgy, 55(2), 157. Retrieved from https://aseestant.ceon.rs/index.php/jmm/article/view/19710
Issue
Vol. 55 No. 2 (2019)
Section
Original Scientific Paper

Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.

The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.

The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).

Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.

Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.

The Corresponding author agrees to inform his/her co-authors, of any of the above terms.