Direct Chromium Alloying by Chromite Ore with the Presence of Metallic Iron
Abstract
Direct chromium alloying by chromite ore in EAF operation is a promising process in stainless steel production, which has the advantage of resource-saving, energy-saving, and environment-friendly. In the present investigation, iron, carbon, and chromite ore mixture (Fe+C+FeCr2O4) were chosen as the precursor for direct chromium alloying. Thermogravimetric Analysis (TGA) experiments were carried out to investigate the effect of iron content on the reduction kinetics, and the results show that the presence of metallic iron in the precursor will increase the reduction rate of chromite. Up-scaling experiments (100 g and 500 g scale) have been carried out in the induction furnace to further test the effectiveness of using industrial chromite ore for direct chromium alloying. The induction furnace tests confirmed the necessity of adjusting composition of the slags to ensure high yield of chromium in the final products; and chromium yield can reach 90%.
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.