Renewable Energy and the Role of Molten Salts and Carbon
Abstract
Molten carbonate fuel cells have been under development for a number of years and reliable units are successfully working at 250kW scale and demonstration units have produced up to 2 MW. Although these cells cannot be considered as renewable as the fuel, hydrogen or carbon monoxide is consumed and not regenerated, the excellent reliability of such a cell can act as a stimulus to innovative development of similar cells with different outcomes. Molten salt electrolytes based upon LiCl – Li2O can be used to convert carbon dioxide, either drawn from the output of a conventional thermal power station or from the atmosphere, to carbon monoxide or carbon. Recently, dimensionally stable anodes have been developed for molten salt electrolytes, based upon alkali or alkaline ruthenates which are highly electronically conducting and these may allow the concept of high temperature batteries to be developed in which an alkali or alkaline earth element reacts with air to form oxides when the battery is discharging and the oxide decomposes when the battery is being recharged. Batteries using these concepts may be based upon the Hall-Heroult cell, which is used worldwide for the production of aluminium on an industrial scale, and could be used for load levelling. Lithium ion batteries are, at present, the preferred energy source for cars in 2050 as there are sufficient lithium reserves to satisfy the world’s energy needs for this particular application. Graphite is used in lithium ion batteries as the anode but the capacity is relatively low. Silicon and tin have much higher capacities and the use of these materials, encapsulated in carbon nanotubes and nanoparticles will be described. This paper will review these interesting developments and demonstrate that a combination of carbon and molten salts can offer novel ways of storing energy and converting carbon dioxide into useful products.
References
K. Sundmacher, A. Kienle, H.J. Pech, J.F. Berndt, G. Huppman. Molten Carbonate Fuel cells; Modeling, Analysis, Simulation, and Control, Wiley-VCH, Weinham, Germany 2007.
V. Kaplan, E. Wachtel, K. Gartsman, Y. Feldman. I. Lubomirsky, J. Electrochem. Soc., 157(4) (2010) B552-B556.
Q. Song, Q. Xu. Y.Wang, X. Shang, X. Kang, 9th International Symposium on Molten Salts Chemistry and Technology (MS9), Trondheim, Norway, June 5-9 2011.
S. Jiao, D.J. Fray, Met. Mat. Trans. 41B (2010) 74 -79.
H. Iwahara, T. Esaka, T. Manghara, J. Appl. Electrochem., 18 (1988) 173-177.
R.J Bouchard, J.L. Gillson.. Mater. Res. Bull., 7 (1972) 873-878.
S.L. Cuffini, V.A. Macagno, R.E. Carbinio, A. Melo, E. Trollund, J.L. Gautier, J. Solid State.Chem., 105 (1993) 161-170.
T. He and R.J. Cava, Phys. Rev.B., 63( 2001) -172404.
C.J. Wen, R.A. Huggins, J. Electrochem. Soc., 128(6) (1981) 1181-1187.
D.R. Sadoway, 9th International Symposium on Molten Salts Chemistry and technology (MS9), Trondheim, Norway, June 5-9 2011.
B. Andersson, I.Rade, Transportation Research, Part D6 (2001) Part D6 297-324.
M. Winter, J.O. Besenhard, Electrochim. Acta, 45 (1999) 31-50.
W.K. Hsu, M. Terrones, H. Terrones, N. Grobert, Chem. Phys. Letters, 294 (1998) 177-183.
C.S. Schwandt, A. Dimitrov, D.J. Fray. J. Electroanalytical Chem., 647 (2010) 150-158.
R. Das Gupta, Ph.D Thesis, University of Cambridge (2009)
F. Habashi. Handbook of Extractive Metallurgy. Wiley-VCH, Weinheim, Germany 1997
A. Cox, D.J. Fray, Trans. IMM- Mineral Processing and Extractive Metallurgy, 106 (1997) C123-127.
J.W.A. Morris, Ph.D Thesis, University of Leeds (1995)
W.H. Kruesi, D.J. Fray, Met. Mat. Trans. 24B (1993) 605-616.
S.Atkas, D.J. Fray, O.Burheim, J. Fensted, E. Acma, Mining Processing and Extractive Metallurgy. 115 (2006) 95-100.
C.K. Lee, K. Rhee, J. Power Sources, 109 (2002)17-21.
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.