Erratum to: Activity and diffusivity of oxygen in the liquid dilute BixSb1-x solutions, J. Min. Metall. Sect. B-Metall. 54 (2) B (2018) 261-270. DOI:10.2298/JMMB180311014J
Abstract
/
References
[2] A.L. Jain, Physical Review Journals, 114(6) (1959) 1518-1528.
[3] B. Lenoir, M. Cassart, J. -P. Michenaud, H. Scherrer, S. Scherrer, Journal of Physics and Chemistry of Solids, 57(1) (1996) 89-99.
[4] G.E. Smith, R. Wolfe, Journal of Applied Physics, 33(3) (1962) 841-846.
[5] K.F. Cuff, R.B. Horst, J.L. Weaver, S.R. Hawkins, C.F. Kooi and G.M. Enslow, Applied Physics Letters, 2(8) (1963) 145-146.
[6] W.M. Yim, A. Amith, Solid-State Electronics, 15(10) (1972) 1141-1165.
[7] G.A. Slack, New Materials and Performance Limits for Thermoelectric Cooling, CRC Handbook of Thermoelectrics, (ed. D. M. Rowe), CRC Press, Boca Raton, 1995, 407-440.
[8] T. Luo, S. Wang, H. Li, X. Tang, Intermetallics, 32 (2013) 96-102.
[9] K. Malik, D. Das, S.K. Neogi, A.K. Deb, A. Dasgupta, S. Bandyopadhyay, A. Banerjee, Journal of Physics and Chemistry of Solids, 91 (2016) 7–12.
[10] E. Combe, R. Funahashi, T. Takeuchi, T. Barbier, K. Yubuta, Journal of Alloys and Compounds, 692 (2017) 563-568.
[11] X.-L. Qi, S.-C. Zhang, Reviews of Modern Physics, 83(4) (2011) 1057-1110.
[12] A Boltasseva, H.A. Atwater, Science, 331(6015) (2011) 290-291.
[13] D. Hsieh, D. Qian, L. Wray, Y. Xia, Y.S. Hor, R.J. Cava, M.Z. Hasan, Nature, 452(7190) (2008) 970-974.
[14] Y.A. Chang, K. Fitzner, M.-X. Zhang, Progress in Materials Science, 32(2-3) (1988) 97-259.
[15] P. Hosemann, Liquid metal coolants for high power heat transport systems, MatISSE/JPNM workshop, November 25th, 2015.
[16] A. Tairi, J.-C. Champarnaud-Mesjard, D. Mercurio, B. Frit, Revue De Chimie Minérale, 22 (1985) 699-710.
[17] S. Otsuka, Y. Kurose, Z. Kozuka, Metallurgical Transactions B, 15B (1984) 141-147.
[18] C.B. Alcock, T.N. Belford, Transactions of the Faraday Society, 60 (1964) 822-835.
[19] T.N. Belford, C.B. Alcock, Transactions of the Faraday Society, 61 (1965) 443-453.
[20] B. Onderka, Ph.D. Thesis, IMIM PAN, Krakow, 1994.
[21] C. Wagner, Acta Metallurgica, 2 (1973) 1297-1303.
[22] J. Crank, The Mathematics of Diffusion, 2nd Ed., Oxford Univ. Press, Oxford, 1975.
[23] T. A. Ramanarayanan, R.A. Rapp, Metallurgical Transactions, 3(12) (1972) 3239-3246.
[24] K.E. Oberg, L.W. Friedman, W.M. Boorstein, R.A. Rapp, Metallurgical Transactions, 4(1) (1973) 61-67.
[25] K. Fitzner, Zeitschrift fur Metallkunde, 71 (1980) 178-181.
[26] K. Fitzner, Thermochimica Acta, 35 (1980) 277-286.
[27] S. Otsuka, Z. Kozuka, Metallurgical Transactions B, 10 (1979) 565-574.
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.