Selection of pulverized coal fuel components for blast furnaces based on the study of physico-chemical processes during their heating
Abstract
There is a global tendency to use technologies related to saving energy costs per unit of production in blast furnace production. This is due to the use of pulverized coal fuel (PCF) instead of part of the coke. The selection of components of the PCF charge from a wide range of carbon-containing materials to expand the raw material base and minimize cost is an important task. One of these materials is peat. The purpose of this work is to develop a methodology for selecting pulverized coal fuel components based on their comprehensive study on the example of milling peat. Industrial experiments were carried out at an operating metallurgical plant. The particle size of PCF is no more than 70-100 μm. Thermal destruction of peat in an inert atmosphere accounts for 59% of the mass loss. The maximum destruction rate is 2.69%/min versus 2.0%/min for long–flame coal. The release of volatile components begins at 425°C for lean coal, 300°C for brown coal and 220°C for peat. The destruction of coal also leads to an increase in the specific surface area. It grows from 2.04 to 161.3 m2/g for brown coal. Combustion accounts for about 27% of the total loss of peat mass, for long-flame coal this value is twice as high. The total thermal effect for coal is in the range from 15510 to 17751 kJ/kg, for peat from 12816 to 14148 kJ/kg. Pulverized coal fuel produced during the pilot period was blown into an industrial blast furnace. The equipment of the PCF feed path, the poppet mill worked stably without changing the operating parameters. There were no deviations in the operation of the blast furnace. Due to the introduction of peat, the consumption of lean coal was reduced. The consumption of PCF and natural gas has practically not changed.
References
[2] X. Cheng, S. Cheng, K. Liu, D. Zhou, Fuel, 271 (2020) 117626. https://doi.org/10.1016/j.fuel.2020.117626.
[3] Y.S. Semenov, V.V. Horupakha, Y.I. Shumelchik, Steel in Translation, 50 (2) (2020) 100-106.
[4] М.С. Завгородный, А.А. Сегеда, В.А. Смоляк, Математическое моделирование, 2 (2013) 72-77 (M.S. Zavgorodniy, A.A. Segeda and V.A. Smolyak, Matematicla Modelimg, 2 (2013) 72-77 (In Russian).
[5] С.Л. Ярошевский, Металл и литье Украины, 3 (2006) 15 (S.L. Yaroshevskiy, Metal and Casting of Ukraine, 3 (2006) 15 (in Russian).
[6] В.А. Шаган, И.В. Макарова, Э.М. Манашева, С.А. Байченко, М.М. Кашапов, Теория и технология металлургического производства, 17 (2) (2015) 5-10 (V.A. Shagan, I.V. Makarova, E.M. Manasheva, S.A. Baichenko, M.M. Kashapov, Theory and Technology of Metallurgical Production, 17 (2) (2015) 5-10 (in Russian).
[7] R. Schott, Stahl Eisen, 136 (2016) 39-47.
[8] Energy Dispersive Spectroscopy / Oxford Instruments, Great Britain. URL: https://nano.oxinst.com/products/eds.
[9] Requirements for coals for use as pulverized coal fuel (PCF) / MetalSpace, Russia. URL: https://metalspace.ru/production-science/technology/fuel/476-trebovaniya-k-uglyam-dlya-ispolzovaniya-v-kachestve-pyleugolnogo-topliva-put.html.
[10] D. Wenzhou, W. Gang, W. Yue, L. Xuelin, Applied Thermal Engineering, 152 (2019) 169-174.
[11] Е.Н. Зо, В.Н. Клюшин, Успехи в химии и в химической технологии, XXXI (9) (2017) 37-8 (E.N. Zo, V.N. Kluschin, Advances in Chemistry and Chemical Technology, XXXI (9) (2017) 37-8 (in Russian).
[12] Q.W. Li, Ya. Xiao, C.P. Wang, J. Deng, Ch.M. Shu, Fuel, 250 (2019) 235-2344. https://doi.org/10.1016/j.fuel.2019.04.003.
[13] P.A. Morgan, S.D. Robertson, J.F. Unsworth, Fuel, 65 (11) (1986) 1546-1551. https://doi.org/10.1016/0016-2361(86)90331-5.
[14] С.Б. Романченко, М.О. Девликанов, Научно-технический журнал «Вестник» 4 (2019) 24-31 (S.B. Romanchenko, M.O. Devlikanov: Scientific and technical journal "Vestnik", 4 (2019) 24-31 (in Russian).
[15] N. Dunayevska, Ya. Zasiadko, T. Shchudlo, Ukrain Food Journal, 7 (4) (2018) 738.
[16] W. Zhao, H. Chen, N. Liu, J. Zhou, Journal of Thermal Analysis and Calorimetry, 117 (2014) 489-497.
[17] П.А. Марьяндышев, А.А. Чернов, В.К. Любов, Международный журнал экспериментального образования, 12 (2014) 20-27 (P.A. Mar’yandyshev, A.A. Chernov, V.K. Lyubov: International Journal of Experimental Education, 12 (2014) 20-27 (in Russian).
[18] D.V. Ermolaev, S.S. Timofeeva, S.I. Islamova, K.S. Bulygina, M.F. Gilfanov: Biomass Convers. Biorefin., 2019, vol. 9, pp. 767-74.
[19] P.A. Mar’yandyshev, A.I. Kangash, V.A. Skripnichenko, A. Brillard, Solid Fuel Chemistry, 56 (4) (2022) 265-70.
[20] A.S. Mikhailov, S.A. Piralishvili, E.G. Stepanov, N.S. Spesivtseva, Journal of Engineering Physics and Thermophysics, 90 (2017) 491-6.
[21] A.M. Amdur, S.A. Fedorov, A.A. Forshev, N.V. Grevtsev, Metallurgist, 67 (2023) 1043-1055. https://doi.org/10.1007/s11015-023-01595-0.
[22] I. Sumirat, Y. Ando, S. Shimamura, Journal of Porous Materials, 13 (2006) 439-43.
[23] Л.Я. Гаврилова, Методы синтеза и исследование перспективных материалов, Уральский государственный университет, Екатеринбург, 2008 (L.Ya. Gavrilova, Methods of synthesis and research of promising materials, Ural State University, Yekaterinburg, 2008 (in Russian)
[24] F. Rezanezhad, J.S. Price, W.L. Quinton, B. Lennartz, T. Milojevic, P. Van Cappellen, Chemical Geology, 429 (2016) 75-84.
[25] K.T. Ibraeva, I.I. Shanenkov, N.A. Yazykov, R.B. Tabakaev, A.S. Zavorin, Thermal Engineering, 70 (2) (2023) 129-38.
[26] А.С. Орлов, Т.И. Пономарева, С.Б. Селянин, М.В. Труфанова, Л.Н. Парфенова, Успехи современного естествознания, 1 (2017) 18-22 (A.S. Orlov, T.I. Ponomoreva, S.B. Selyanina, M.V. Trufanova, L.N. Perfenova, The Successes of Modern Natural Science, 1 (2017) 18-22 (in Russian).
[27] А.А. Терентьев, В.И. Суворов, Исследование структуры торфа, Наука и Технологии, Минск, 1980 (A.A. Terent’ev, V.I. Suvorov, Peat structure studies, Science and Technology Co., Minsk, 1980 (in Russian).
Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.
The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).
Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.
Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.
The Corresponding author agrees to inform his/her co-authors, of any of the above terms.