Deformation behavior of typical inclusions in GCr15 during hot rolling process

  • Jianli Li Wuhan University of science and technology
  • Yuhang Jiang Wuhan University of science and technology
  • Qiqiang Mou CNCEC-EEC Dajiang Environmental Protection Technology Co., LTD.
  • Xiaodong Deng Wuhan University of Science and Technology
  • Rodrigue Armel Muvunyi Wuhan University of Science and Technology
Keywords: Hot rolling, Complex inclusions, Stress concentration, Strain difference, Finite element simulation

Abstract


Non-metallic inclusions significantly impact the lifespan of bearing steel. Investigating the deformation behavior of these inclusions during the rolling process is crucial for controlling their shape and size in production. This study focuses on GCr15 bearing steel, a representative grade of bearing steel, and utilizes the finite element software ABAQUS to simulate the deformation of Al2O3 inclusions, MnS inclusions, and Al2O3-MnS composite inclusions after hot rolling of GCr15 steel. The findings indicate that when the size of inclusions is within 10 µm, their type and shape have a more significant impact than variations in size. Among them, Al2O3-MnS composite inclusions exhibit the least harm to the steel matrix. The stress concentration of Al2O3 inclusions will appear on the MnS cladding layer, which can slow down the occurrence of cracks. Additionally, the aspect ratio of MnS inclusions decreases after rolling, diminishing its influence on the steel matrix's anisotropy. Simultaneously, composite inclusions can harmonize the deformation capabilities of the inclusions and the steel matrix, thereby minimizing the likelihood of void formation. Consequently, in the smelting process, it is beneficial to modify inclusions into regular circular shapes and form composite Al2O3-MnS inclusions to mitigate their detrimental effects on the steel matrix.

References

[1] P. Wang, P. Zhang, B. Wang, Y. Zhu, Z. Xu, Z. Zhang. Fatigue cracking criterion of high-strength steels induced by inclusions under high-cycle fatigue, Journal of Materials Science & Technology, 154 (2023) 114.
https://doi.org/ 10.1016/j.jmst.2023.02.006.
[2] J-H. Kang, B. Hosseinkhani, P. E. J. Rivera-Díaz-del-Castillo. Rolling contact fatigue in bearings: multiscale overview, Materials Science and Technology, 28 (2012) 44.
https://doi.org/10.1179/174328413X13758854832157.
[3] C. Gu, M. Wang, Y. Bao, F. Wang, J. Lian. Quantitative analysis of inclusion engineering on the fatigue property improvement of bearing steel, Metals. 9 (2019) 476.
https://doi.org/ 10.3390/met9040476.
[4] H. Wu, Q. Li, C. Wei, C. Wei, Z. Wang. Study on the behaviour of DS-Class inclusions in advanced bearing steel, Metallurgical Research & Technology, 116 (2019) 223.
https://doi.org/10.1051/metal/2018096.
[5] N. Liu, G. Cheng, L. Zhang, G. Cheng, L. Zhang, G. Wang. Composition evolution and deformation of different non-metallic inclusions in a bearing steel during hot rolling, Journal of Iron and Steel Research International, 29 (2022) 552.
https://doi.org/10.1007/s42243-022-00761-z.
[6] X. Z. Liang, G. H. Zhao, J. Owens, P. Gong, W.M. Rainforth, P.E.J. Rivera-Díaz-del-Castillo. Hydrogen-assisted microcrack formation in bearing steels under rolling contact fatigue, International Journal of Fatigue, 134 (2020) 105485.
https://doi.org/10.1016/j.ijfatigue.2020.105485.
[7] N. K. Arakere. Gigacycle rolling contact fatigue of bearing steels: A review, International Journal of Fatigue, 93 (2016) 23.
https://doi.org/10.1016/j.ijfatigue.2016.06.034.
[8] C. Gu, W. Liu, J. Lian, Y. Bao. In-depth analysis of the fatigue mechanism induced by inclusions for high-strength bearing steels, International Journal of Minerals, Metallurgy and Materials, 28 (2021) 826.
https://doi.org/10.1007/s12613-020-2223-9.
[9] Q. Zeng, W. Hui, Y. Zhang, X. Liu, Z. Yao. Very high-cycle fatigue performance of high carbon-chromium bearing steels with different metallurgical qualities, International Journal of Fatigue, 172 (2023) 107632.
https://doi.org/10.1016/j.ijfatigue.2023.107632.
[10] Q. Zeng, J. Li, Q. Xu, Y. Yu. Effect of MgO on crystallization behavior of MnO–SiO2–Al2O3 based inclusions in tire cord steel, Heliyon, 8 (2022) 11.
https://doi.org/10.1016/j.heliyon.2022.e11800.
[11] Q. Xu, Y. Meng, J. Li. Effect of MgO on structure and crystallization behavior of CaO–SiO2–Al2O3 inclusions in Si–Mn deoxidized steel, Journal of Iron and Steel Research International, (2024) 1.
https://doi.org/10.1007/s42243-024-01236-z.
[12] C. Wang, X. Liu, J. Gui, Z. Du, Z. Xu, B. Guo. Effect of MnS inclusions on plastic deformation and fracture behavior of the steel matrix at high temperature, Vacuum, 174 (2020¬) 109209.
https://doi.org/10.1016/j.vacuum.2020.109209.
[13] C. Yang, P. Liu, Y. Luan, D. Li, Y. Li. Study on transverse-longitudinal fatigue properties and their effective-inclusion-size mechanism of hot rolled bearing steel with rare earth addition, International Journal of Fatigue, 128 (2019) 105193.
https://doi.org/10.1016/j.ijfatigue.2019.105193.
[14] Y. Song, H. Zhang, L. Ren. A review of research on MnS inclusions in high‐quality steel, Engineering Reports, 6 (2024¬) e12892.
https://doi.org/10.1002/eng2.12892.
[15] N. Matsuoka, M. Terano, T. Ishiguro, E. Abe, N. Yukawa, T. Ishikawa, Y. Ueshima, K. Yamamoto, K. Isobe. Computer simulation of deformation behavior of non-metallic inclusion in hot-rolling, Procedia Engineering, 81 (2014) 120.
https://doi.org/10.1016/j.proeng.2014.09.137.
[16] A. Gupta, S. Goyal, K. A. Padmanabhan, A. K. Singh. Inclusions in steel: micro–macro modelling approach to analyse the effects of inclusions on the properties of steel, The International Journal of Advanced Manufacturing Technology, 77 (2015) 565.
https://doi.org/10.1007/s00170-014-6464-5.
[17] R. Cheng, J. Zhang, B. Wang. Deformation behavior of MnO13%-Al2O318%-SiO269% inclusion in different steels during hot rolling processes, Metallurgical Research & Technology, 114 (2017) 608.
https://doi.org/10.1051/metal/2017058.
[18] H. Zhang, G. Feng. FEM simulation of inclusion in medium plate during rolling, Hot Working Technol, 40 (2011) 41.
https://doi.org/10.1519/JSC.0b013e3181da7858.
[19] J. Ge, Z. Cheng, S. Cheng, Y. Zheng. J. Li. M. Zhou. Evolution of voids around inclusions during CSP hot rolling process, Journal of Iron and Steel Research, 27 (2015) 24.
https://doi.org/10.13228/j.boyuan.issn1001-0963.20130370.
[20] S. Guo, H. Zhu, J. Zhou, M. Song, S. Dong. An in situ scanning electron microscope study of void formation induced by typical inclusions in low‐density steel during tensile deformation, Steel Research International, 93 (2022) 2200388.
https://doi.org/10.1002/srin.202200388.
[21] K. Chung, R. Wagoner. Numerical improvement of viscoplastic, non-linear, finite-element analysis, International Journal of Mechanical Sciences, 29 (1987) 45.
https://doi.org/10.1016/0020-7403(87)90073-7.
[22] M. Ahmed, G. Sekhon, D. Singh. Finite element simulation of sheet metal forming processes, Defence Science Journal, 55 (2005) 389.
https://doi.org/10.14429/dsj.55.2002.
[23] R. Cheng, J. Zhang, B. Wang. Deformation behavior of inclusion system CaO–Al2O3–SiO2 with different compositions during hot rolling processes, Transactions of the Indian Institute of Metals, 71 (2018) 705-713.
https://doi.org/10.1007/s12666-017-1203-x.
[24] G. Pan, Z. Luo, C. Lin. Flow stress constitutive equation of as-cast gcr15simn bearing steel, Materials For Mechanical Engineering, 43 (2019) 66-70.
https://doi.org/10.11973/jxgccl201910013.
[25] W. Guo, X. Zheng, Z. Xue, W. Lun, R. Zhou. The simulation analysis of the residual stress which product in the cooling process of sintering alumina ceramic plate by computer, Jiangsu Ceramics, 49 (2016) 20-23.
https://doi.org/10.16860/j.cnki.32-1251/tq.2016.05.007.
[26] J. Miao, L. Yu, X. Liu, B. Guo. High temperature stress–strain curves of MnS and their applications in finite element simulation, Transactions of Nonferrous Metals Society of China, 28 (2018) 2082-2093.
https://doi.org/10.1016/s1003-6326(18)64852-6.
[27] C. Luo, U. Ståhlberg. An alternative way for evaluating the deformation of MnS inclusions in hot rolling of steel, Scandinavian Journal of Metallurgy, 31 (2002) 184-190.
https://doi.org/10.1034/j.1600-0692.2002.310304.x.
[28] Y. Xia, D. Fan, S. Wang, J. Li, Y. He. Effect of isothermal-rolling process on the morphology, size and distribution of Type II MnS, Applied Mechanics and Materials, 364 (2013) 589-593.
https://doi.org/10.4028/www.scientific.net/amm.364.589.
[29] H. Yu, X. Liu, H. Bi, L. Chen. Deformation behavior of inclusions in stainless steel strips during multi-pass cold rolling, Journal of Materials Processing Technology, 209 (2009) 455-461.
https://doi.org/10.1016/j.jmatprotec.2008.02.016.
[30] Y. Han, L. Hao, J. Wang, W. Ke. Effect of rare earth addition on corrosion sensitivity of GCr15 bearing steel in marine environment, Materials Letters, 333 (2023) 133693.
https://doi.org/10.1016/j.matlet.2022.133693.
[31] Z. Dong, D. Qian, F. Wang, F. Yin. Enhanced impact toughness of previously cold rolled high-carbon chromium bearing steel with rare earth addition, Journal of Materials Engineering and Performance, 30 (2021) 8178-8187.
https://doi.org/10.1007/s11665-021-06038-y.
[32] C. Yang, Y. Luan, D. Li, Y. Li. Effects of rare earth elements on inclusions and impact toughness of high-carbon chromium bearing steel, Journal of Materials Science & Technology, 35 (2019) 1298-1308.
https://doi.org/10.1016/j.jmst.2019.01.015
Published
2025/01/13
How to Cite
Li, J., Jiang, Y., Mou, Q., Deng, X., & Muvunyi, R. A. (2024). Deformation behavior of typical inclusions in GCr15 during hot rolling process. Journal of Mining and Metallurgy, Section B: Metallurgy, 60(3), 381-394. Retrieved from https://aseestant.ceon.rs/index.php/jmm/article/view/53216
Issue
Vol. 60 No. 3 (2024)
Section
Original Scientific Paper

Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.

The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.

The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).

Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.

Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.

The Corresponding author agrees to inform his/her co-authors, of any of the above terms.