Characterization of the expanded austenite developed on AISI 316 LM steel by plasma nitriding

  • MOURAD KEDDAM Laboratoire de Technologie des Matériaux, Département SDM Faculté GM et GP USTHB
  • TONY Thiriet Institut Jean Lamour (IJL)
  • Grégory MARCOS Institut Jean Lamour (IJL)
  • Thierry Czerwiec Institut Jean Lamour (IJL)

Abstract


The samples of  AISI 316 LM stainless steel were plasma nitrided at a temperature of 380°C for different times between 0.5 and  8 h in a 85%N2-15% H2 gas mixture. Different experimental techniques such as : optical microscopy (OM), X- rays diffraction (XRD ) and glow discharge optical emission  spectroscopy (GDOES) were used to characterize the expanded austenite layer formed  on the surface of AISI 316 LM stainless steel. The microscopical observations revealed the presence of the expanded austenite with a mean layer thickness between 1.90 and 4.31 µm. The growth kinetics of expanded austenite was also investigated. In addition, both the compressive stresses in the expanded austenite layer and the compositional strains were estimated by means of a simple mechanical model based on the XRD results.

References

M. Cindra Fonseca, I.N. Bastos, E. Baggio-Saitovitch , D.R. Sánchez , Corrosion Science

N.R. Baddoo, Journal of Constructional Steel Research 64 (2008) 11, 1199-1206.

P. Boillot and J. Peultier, Procedia Engineering, 83 ( 2014), 309-321

T. Bell, Surface Engineering 18 (2002), 415–422.

S. Corujeira Gallo, X. Li, H. Dong, Tribology Letters 45 (2012), 153–160.

S. Corujeira Gallo, H. Dong, Applied Surface Science 258 (2011) , 608–613.

A. Devaraju, A. Elaya Perumal, J. Alphonsa, S.V. Kailas, S. Venugopal, Wear 288 (2012), 17–26.

D. Zeng, S. Yang, Z.D. Xiang, Applied Surface Science 258 (2012), 5175–5178.

A.M. Kliauga, M. Pohl, Surf. Coat. Technol. 98 (1998), 1205-1210.

T. Bell, Y. Sun, Heat Treat. Met. 29 (2002), 57-64.

M.P. Fewell, D.R.G. Mitchell, J.M. Priest, K.T. Short, G.A. Collins, Surf. Coat. Technol. 131 (2000), 300-306.

S. Kumar, M.J. Bladwin, M.P. Fewell, S.C. Haydon, K.T. Short, G.A. Collins, J. Tendys, Surf. Coat. Technol. 123 (2000), 29-35.

D. Manova, S. Mandl, H. Neumann, B. Rauschenbach, Surf. Coat. Technol. 200 (2006), 6563-6567.

F. Borgioli, A. Fossati, E. Galvanetto, T. Bacci, Surf. Coat. Technol. 200 (2005), 2474-2480.

G.P. Singh, J. Alphonsa, P.K. Barhai, P.A. Rayjada, P.M. Raole, S. Mukherjee, Surf. Coat. Technol. 200 (2006), 5807-5811.

M. Keddam, G. Marcos, T. Thiriet, T. Czerwiec and H. Michel, Matériaux et Techniques 101, 204 (2013).

E. Menthe, U.A. Bulak, J. Olfe, A. Zimmermann, K.T. Rie, Surf. Coat.

T. Bacci, F. Borgioli, E. Galvanetto, G. Pradelli, Glow-discharge nitriding of sintered stainless steels, Surf. Coat. Technol. 139 (2001), 251-356.

C.X. Li, T. Bell, Corros. Sci. 46 (2004) , 1527-1547.

A. Martinavicius, G. Abrasonis, A.C. Scheinost, R. Danoix, F. Danoix, J.C. Stinville,G. Talut, C. Templier, O. Liedke, S. Gemming, W. Möller, Acta Materialia 60 (2012), 4065–4076.

J. García Molleja, M. Milanese, M. Piccoli, R. Moroso, J. Niedbalski, L. Nosei, J. Bürgi, E. Bemporad , J. Feugeas, Surf. Coat. Technol. 218 (2013), 142–151

N.Z.Negm, Materials Science and Engineering B 129 (2006) ,207–210

M. Hudis, Study of ion-nitriding, J. Appl. Phys. 44 (1973), 1489-1496.

R.R.M. de Sousa, F.O. de Araújo, L.C. Gontijo, J.A.P. da Costa, C. Alves Jr, Vacuum 86 (2012) , 2048-2053

L. Wang, S. Ji, J. Sun, Surf. Coat. Technol., 200 (2006), 5067-5070.

[ 26] L. Nosei, M. Avalos, B.J. Gomez, L. Nachez, J. Feugeas, Thin Solid Films 468 (2004) 134– 141

P. Shewmon, Diffusion in Solids, Minerals, Metals and Materials Society,USA,1999.

T. Moskalioviene, A. Galdikas, J.P. Rivière, L. Pichon, Surf. Coat. Technol. 205 (2011), 3301-3306.

H. Dong, International Materials Reviews 55 (2010) , 65–98.

Y. Sun, X.Y. Li, T. Bell, Journal of Materials Science 34 (1999) , 4793–4802.

Yang Li, Zhuo Wang and Liang Wang, Applied Surface Science 298 (2014), 243–250

T. Czerwiec, H. He, G. Marcos, T. Thiriet, S. Weber, H. Michel, Plasma Process. Polym. 6 (2009), 401-409.

V. Hauk, Structural and Residual Stress Analysis by Non destructive Methods, Elsevier, Amsterdam, 1997.

V. Rejevac, M. Hoelzel, S.A. Danilkin , A. Hoser, H. Fuess, J. Phys. Condens. Matter, 16 (2004) 2609.

A. Teklu, H. Ledbetter, S. Kim, L.A. Boatner, M. McGuire, V. Keppens, Mett. Mat.Trans. A 35 (2004), 3149-3154.

S. Picard, J.B. Memet, R. Sabot, J.L. Grosseau-Poussard, J.P. Rivière, R. Meilland, Materials Science And Engineering A 303 (2001), 163-172.

J. Feugeas, L. Rico, L. Nosei, B. Gómez, E. Bemporad, J. Lesage, J. Ferrón, Surface and Coatings Technology 204 (2010), 1193–1199

Published
2016/12/31
How to Cite
KEDDAM, M., Thiriet, T., MARCOS, G., & Czerwiec, T. (2016). Characterization of the expanded austenite developed on AISI 316 LM steel by plasma nitriding. Journal of Mining and Metallurgy, Section B: Metallurgy, 53(1), 47-52. Retrieved from https://aseestant.ceon.rs/index.php/jmm/article/view/9290
Issue
Vol. 53 No. 1 (2017)
Section
Original Scientific Paper

Authors retain copyright of the published papers and grant to the publisher the non-exclusive right to publish the article, to be cited as its original publisher in case of reuse, and to distribute it in all forms and media.

The Author(s) warrant that their manuscript is their original work that has not been published before; that it is not under consideration for publication elsewhere; and that its publication has been approved by all co-authors, if any, as well as tacitly or explicitly by the responsible authorities at the institution where the work was carried out. The Author(s) affirm that the article contains no unfounded or unlawful statements and does not violate the rights of others. The author(s) also affirm that they hold no conflict of interest that may affect the integrity of the Manuscript and the validity of the findings presented in it. The Corresponding author, as the signing author, warrants that he/she has full power to make this grant on behalf of the Author(s). Any software contained in the Supplemental Materials is free from viruses, contaminants or worms.

The published articles will be distributed under the Creative Commons Attribution ShareAlike 4.0 International license (CC BY-SA).

Authors are permitted to deposit publisher's version (PDF) of their work in an institutional repository, subject-based repository, author's personal website (including social networking sites, such as ResearchGate, Academia.edu, etc.), and/or departmental website at any time after publication.

Upon receiving the proofs, the Author(s) agree to promptly check the proofs carefully, correct any typographical errors, and authorize the publication of the corrected proofs.

The Corresponding author agrees to inform his/her co-authors, of any of the above terms.