MEHANIČKE OSOBINE HELJDINE PERGE
Sažetak
Owing to a limited body of information on perga properties in the literature, the compressive properties of perga were determined in this study using uniaxial compressive tests. Certain mechanical properties such as the failure stress and strain and the modulus of elasticity can be used to evaluate the mechanical behavior of buckwheat (Fagopyrum esculentum) perga pellets under static loading. The Andilog Stentor 1000 testing machine (Andilog Technologies, Vitrolles, France) was employed for the uniaxial compression testing conducted. The perga samples considered were tested at different strain rates and loading speeds: four speeds ranging from 10 to 90 mm/min were used to achieve different strain rates. The influence of strain rates on the sample stress state was studied. The nonlinear regression model was tested to account for the stress-strain curves obtained. The loading curves of dependence of the stress on the strain were formed. Different strain rates and loading speeds were found to exert a significant effect on the stress and strain state of the perga samples examined, i.e. their overall firmness.
Reference
Bleha, R., Votochkova, M., Synytsya, A., Brindza, J. (2015) Distribution of bee pollen granules according to vibration spectroscopic markers. Naukovij visnik Nacionaľnovo universitetu bioresursiv i prirodokoristuvannija Ukrainy, Seria: Technologia virobnictva i pererobotky produkcii tvarinnictva, Kijiv. 223: 7 – 17, ISSN 2222-8578.
Brindza, J., Schubertova, Z., Brovarskyi, V., Velychko, S., Kreft, I., Ivanišovа, E. (2015) The evaluation of bee bread quality. Naukovij visnik Nacionaľnovo universitetu bioresursiv i prirodokoristuvannija Ukrainy, Seria: Technologia virobnictva i pererobotky produkcii tvarinnictva, Kijiv. 223: 25 – 34, ISSN 2222-8578.
Zuluaga C. M., Serrato, J. M., Quicazan M. C. (2015) Chemical, Nutritional and Bioactive Characterization of Colombian Bee-Bread. Chemical Engineering Transactions. 43: 175–180.
Babić, Lj., Radojčin, M., Babić, M., Pavkov, I., and Mehandžić – Stanišić, S. (2012) Mechanical properties of sunflower (Helianthus Annuus L.) fruit affected by different hybrids. Journal on Processing and Energy in Agriculture, 16; 3; 93-97.
Babić, L., Radojćin, M., Pavkov, I., Babić, M., Turan, J., Zoranović, M. and Stanišić, S. (2013) Physical properties and compression loading behaviour of corn seed. International Agrophysics, 27, 119-126.
Božiková, M. and Hlaváč, P. (2013) Thermophysical and rheologic properties of biooil samples. Journal of Central European, Agriculture 14(3) 279 – 290.
Hlaváčová, Z., Božiková, M., Hlaváč, P., Regrut, T., and Ardonová, V. (2018) Selected physical properties of various diesel blends. Int. Agrophys., 32, 93 – 100.
