Education in coordinates of Industry 4.0 and Industry 5.0

  • Jovan R. Bazić University of Priština, in Kosovska Mitrovica, Teachers Education Faculty Prizren – Leposavić, Leposavić (Serbia)
  • Bojana D. Sekulić Institute for Political Studies, Belgrade (Serbia)
Keywords: education, Industry 4.0, Industry 5.0, Serbia

Abstract


Industry 4.0 (I4.0) and Industry 5.0 (I5.0) are based on knowledge acquired in education and organized in the form of scientific research activities and materialized in technological innovations, new products and services. The aim of this paper is to consider various aspects of the mutual relationship between education and technologies I4.0 and I5.0. In addition to the fact that education affects the development of technological innovations, the production of new knowledge and educational profiles; technologies I4.0 and I5.0 have a direct impact on education, from changes in the organizational structure of educational institutions and teaching programmes, through the introduction of new technologies and knowledge in teaching, changes in learning methods, to the establishment of the obligation of continuous professional development of teachers. Since this paper has a theoretical character, the content analysis and the synthetic method will be mainly applied in it in order to arrive at relevant results.

References

Akgunduz, D., Mesutoglu, C. (2021). Science, Technology, Engineering, and Mathematics Education for Industry 4.0 in Technical and Vocational High Schools: Investigation of Teacher Professional Development. Science Education International, 32(2), 172–181. https://doi.org/10.33828/sei.v32.i2.11
/>Alakrash, H. M., Razak, N. A. (2021). Education and the fourth industrial revolution: Lessons from COVID-19. Computers, Materials and Continua, 70(1), 951–962.
https://doi.org/10.32604/cmc.2022.014288
/>Alzahrani, B., Bahaitham, H., Andejany, M., Elshennawy, A. (2021). How Ready Is Higher Education for Quality 4.0 Transformation according to the LNS Research Framework? Sustainability, 13(9), 5169.
https://doi.org/10.3390/su13095169
/>Andres, P., Hrmo, R., Dobrovská, D., Albertová, B. (2020). Undergraduate Educational System of Technical Teacher Education in the Czech Republic. R&E-SOURCE. Available at:
https://journal.ph-noe.ac.at
/>Bazić, J. (2017). Trends in societal and educational changes generated by the Fourth Industrial Revolution. Sociološki pregled, 51(4), 526–546. DOI: 10.5937/socpreg51-15420
Bazić, J., Knežević, M. (2016). Knowledge in EU Development Strategies. Knowledge, 15(1), 83–88. Available at:
https://ikm.mk/ojs/index.php/kij/article/view/4451
/>Chou, C. M., Shen, C. H., Hsiao, H. C., Shen, T. C. (2019). An Investigate of Influence Factor for Tertiary Students’ M-learning effectiveness: Adjust Industry 4.0 & 12-Year Curriculum of Basic Education. International Journal of Psychology and Educational Studies, 6(2), 66–76.
https://doi.org/10.17220/ijpes.2019.02.007
/>Coelho, P., Bessa, C., Landeck, J., Silva, C. (2023). Industry 5.0: The Arising of a Concept. Procedia Computer Science. 217, 1137–1144.
https://doi.org/10.1016/j.procs.2022.12.312
/>Đorić, Ž., Roganović, M. (2021). Industry 4.0: Exploring the concept and implications for business. International Journal of Economic Practice and Policy, 18(1), 95–123.
https://doi.org/10.5937/skolbiz1-34989
/>EC – European Commission. (2010). Europe 2020: A strategy for smart sustainable and Inclusive growth. Available at:
http://hdl.voced.edu.au/10707/89925
/>EC – European Commission. (2019). A Europe fit for the digital age. Available at:
https://com-mission.europa.eu/strategy-and-policy/priorities-2019-2024/europe-fit-digital-age_en
/>EC – European Commission. (2020a). Sustainable Development Goals.. European Commission. Available at:
https://commission.europa.eu/strategy-and-policy/international-strategies/sustainable-development-goals_en
/>EC – European Commission. (2020b). European Skills Agenda for sustainable competi-tiveness, social fairness and resilience. Available at:
https://ec.europa.eu/social/main.jsp?catId=1223&langId=en
/>EUCO – European Council. (2000). Lisbon European Council 23 and 24 March: Presidency conclusions. Available at:
https://www.europarl.europa.eu/summits/lis1_en.htm
/>Evjemo, L. D., Gjerstad, T., Grøtli, E. I., Sziebig, G. (2020). Trends in Smart Manufacturing: Role of Humans and Industrial Robots in Smart Factories. Current Robotics Reports, 1, 35–41.
https://doi.org/10.1007/s43154-020-00006-5
/>Fadzil, N. A., Hatim, S. M., Elias, S. J., Ismail, S. N., Khang, A. W. Y. (2020). Chemistry Education (Rate of Reaction) via E-leaming Mobile Application. In: 2020 5th IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE), 1–4. DOI: 10.1109/ICRAIE51050.2020.9358320
Gerasimova, E. B., Kurashova, A. A., Tipalina, M. V., Bulatenko, M. V., Tarasova N. V. (2019). New state standards of higher education for training of digital personnel in the conditions of Industry 4.0. On the Horizon. DOI: 10.1108/OTH-07-2019-0043
Government of the Republic of Serbia (Vlada Republike Srbije). (2023). Serbia, the Country of Opportunities. [In Serbian] Available at:
https://www.srbija.gov.rs/ [In Serbian]
Grech, R. (2016). Intelligent Automation–Smart Manufacturing. Intelligent Environments IOS Press. Available at: https://www.iospress.com/catalog/books/intelligent-envi-ronments-2016
/>Griggs, D., Stafford-Smith, M., Gaffney, O., Rockström, J., Öhman, M. C., Shyamsundar, P., Steffen, W., Glaser, G., Kanie, N., Noble, I. (2013). Sustainable development goals for people and planet. Nature 495, 305–307.
https://doi.org/10.1038/495305a
/>Ibarra, D., Ganzarain, J., Igartua, J. I. (2018). Business model innovation through Industry 4.0: a review. Procedia Manufacturing, 22, 4–10.
https://doi.org/10.1016/j.promfg.2018.03.002
/>Joković, J. (2020). Application of Industry 4.0 Concept in the Republic of Serbia. Zbornik Fakulteta tehničkih nauka u Novom Sadu, 35(10), 1782–1785. DOI:
https://doi.org/10.24867/09GI12Jokovic [In Serbian]
Kovshov, E. E., Lesin, S. M., Kuvshinnikov, V. S. (2020). Digital engineering school on the way to digital production. In: Journal of Physics: Conference Series, 1691 (1). DOI: 10.1088/1742-6596/1691/1/012076
Kuleto, V. (2021). Future technological development should be adjusted to people and protect workers and not vice versa; What does industry 5..0 bring (and what does it take away? Available at: https://www.valentinkuleto.com/2021/03/buduci-tehnoloski-razvoj-tre-ba-da-se-prilagodi-ljudima-i-da-stiti-radnike-a-ne-obrnuto-sta-donosi-a-sta-odno-si-industrija-5-0/ [In Serbian]
Lorenzo, N., Gallon, R., Palau, R., Mogas, J. (2021). New Objectives for Smart Classrooms from Industry 4.0. Technology, Knowledge and Learning, 1–13, 719–731. Available at: https://link.springer.com/article/10.1007/s10758-021-09527-0
/>Majstorović, V. D., Đuričin, D., Mitrović, R. (2022). Industry 4..0: Renaissance of Engineering. Beograd: Univerzitet u Beogradu, Mašinski fakultet. [In Serbian]
Mariana, N. (2019). Transformation of research education at elementary school mathematics in the industry 4.0. International Journal of Innovation, Creativity and Change, 5(5), 1–10. Available at:
https://www.ijicc.net/images/vol5iss5/Part_2/55223_Mariana_2020_E_R.pdf
/>Mitrović, R. (2019). Serbia 4..0: Future that must not be missed. Beograd: Zavod za udžbenike [In Serbian]
Mukhadis, A., Putra A. B. N. R., Kiong, T. T., Sutadji, E., Puspitasari, P., Sembiring, A. I., Subandi, M. S. (2021). The innovation of learning plan designer based mobile web to improve quality of learning media in vocational technology for education 4.0. In: Journal of Physics: Conference Series, 1833 (1). DOI 10.1088/1742-6596/1833/1/012030
Nga, P. T. H., Le, T. T., Phan, T. T. (2018) . Impacting the Industry 4.0 on the Training Quality and Student’s Satisfaction at Lac Hong University. Journal of Management Information and Decision Sciences, 21(1), 1–18. Available at:
https://www.abacademies.org/abstract/impacting-the-industry-40-on-the-training-quality-and-students-satis-faction-at-lac-hong-university-7544.html
/>Nikolić, G. (2021). Robots and Unemployment. Polytechnic and design, 9(4), 270–276. DOI: 10.19279/TVZ.PD.2021-9-4-05 [In Croatian]
Oberhaus, D. (2015). This Is What the Fourth Industrial Revolution Looks Like. Available at:
https://www.vice.com/en/article/4x3p43/life-after-the-fourth-industrial-revolution
/>Pangestu, F. (2019). The Readiness of Automotive Workshop and Laboratory in Vocational Education High School in Facing 4.0 Industrial Era. In: Journal of Physics: Conference Series, 1273 (1). DOI: 10.1088/1742-6596/1273/1/012013
Petrović, P. B. (2022). Industry 5.0 – New Nihilistic Platform for Sustainable Future of Europe. Industrija. Available at:
https://www.industrija.rs/vesti/clanak/industrija-5.0-nova-ho-listicka-platforma-za-odrzivu-buducnost-evrope [In Serbian]
Putra, R. B., Ridwan, M., Mulyani, S. R., Ekajaya, D. S., Putra, R. A. (2019). Impact of learning motivation, cognitive and self-efficacy in improving learning quality e-learn-ing in Industrial Era 4.0. In: Journal of Physics: Conference Series, 1339 (1). DOI: 10.1088/1742-6596/1339/1/012081
Rada, M. (Dec. 1, 2015). Industry 5..0 – from virtual to physical. Available at: https://www.linkedin.com/pulse/industry-50-from-virtual-physical-michael-rada
/>Radun, V. (2020). Transformation of Organizational Culture in Higher Education of Serbia in Terms of Smart Learning Environment. Limes+, (3), 97–130. doi: 10.5281/zenodo.4621489
Recalde, J. M., Palau, R., Galйs, N. L., Gallon, R. (2020). Developments for Smart Classrooms: School Perspectives and Needs. International Journal of Mobile and Blended Learning, 12(4), 34–50.
https://doi.org/10.4018/IJMBL.2020100103
/>Sari, P. K., Priyatna, N. M., Fatonah, U., Laswandi, H., Susilawati, E. S., Fitria, E., Sallu S. A. (2019). A Need Analysis of Innovation in Educational Technology to Increase the Quality of Website Learning in Industrial Revolution Era 4.0 Using Waterfall Method. Journal of Physics: Conference Series, 1364(1). DOI: 10.1088/1742-6596/1364/1/012021
Schwab, K. (2016). The Fourth Industrial Revolution: What it means, how to respond. Available at:
https://www.weforum.org/agenda/2016/01/the-fourth-industrial-revolution-what-it-means-and-how-to-respond/
/>Sekulić, B. (2022). Dual Education: Preparation for the Labour Market or Entry into the World of Labour. Politička revija, 74(4), 215–235.
https://doi.org/10.22182/pr.7442022.9 [In Serbian]
Shukalov, A. V., Zakoldaev, D. A., Zharinov, I. O., Zharinov, O. O. (2020). Androgogy of Education 4.0 for university lecturers of technical subjects. Journal of Physics: Conference Series, 1691(1). DOI 10.1088/1742-6596/1691/1/012202
Soenarto, S., Sugito, S., Suyanta, S., Siswantoyo, S., Marwanti, M. (2020). Vocational and senior high school professional teachers in Industry 4.0. Jurnal Cakrawala Pendidikan, 39(3), 655–665. DOI: 10.21831/cp.v39i3.32926
Stankić, R., Jovanović, B. G., Soldić, J. A. (2018). Information-Communication Technologies in Education as Encouragement for Economic Development. Ekonomski horizonti, 20(1), 61–73. https://doi.org/10.5937/ekonhor1801061S [In Serbian]
Statistical Office of the Republic of Serbia (Republički zavod za statistiku/RSZ). (2022). Higher Education 2021/2022. Available at: https://publikacije.stat.gov.rs/G2022/Pdf/G20226012.pdf [In Serbian]
Tadić, D. M. (2022). Impact of Industry 4.0 on changes in education. Tehnika, 77 (2), 257–263. DOI: 10.5937/tehnika2202257T [In Serbian]
Tjiptady, B. C., Yoto, T. (2019). Improving the Quality of Vocational Education in the 4.0 Industrial Revolution by using the Teaching Factory Approach. International Journal of Innovation, 8(1), 7. Available at: https://www.ijicc.net/images/vol8iss1/8104_Tjiptady_2019_E_R.pdf
/>Tosello, E., Castaman, N., Menegatti, E. (2019). Using robotics to train students for Industry 4.0. IFAC-PapersOnLine, 52(9), 153–158. DOI: 10.1016/j.ifacol.2019.08.185
Verner, I. M., Cuperman, D., Reitman, M. (2021). Exploring Robot Connectivity and Collaborative Sensing in a High-School Enrichment Program. Robotics, 10 (1), 13.
https://doi.org/10.3390/robotics10010013
/>Verner, I., Cuperman, D., Romm, T., Reitman, M., Chong, S. K., Gong, Z. (2020). Intelligent Robotics in High School: An Educational Paradigm for the Industry 4.0 Era. In: M. Auer, & T. Tsiatsos (eds.). The Challenges of the Digital Transformation in Education. ICL 2018. Advances in Intelligent Systems and Computing, vol. 916. Springer, Cham. 824–832.
https://doi.org/10.1007/978-3-030-11932-4_76
/>Vuksanović, D. (2020). Factories of the Future through the Prism of the Latest Industrial Revolution. (doctoral dissertation). Beograd: Univerzitet Singidunum. Available at:
https://nardus.mpn.gov.rs/handle/123456789/17558 [In Serbian]
WEF – World Economic Forum. (2023). Annual Meeting. Available at: https://www.weforum.org/events/world-economic-forum-annual-meeting-2023
/>

Published
2023/07/20
Section
Review scientific paper