The role of quality methods in improving education process: Case study
Sažetak
This paper presents a methodology for applying the Lean Six Sigma method on the educational process. After defining defects that have negative influence on the final quality evaluation of higher education and how these defects can be remedied, the Pareto analysis is done, and that is used for establishing a vital minority of the exams that are critical for examination of faculty. The next step is the Statistical Process Control (SPC) analysis that is performed on the exams that are classified as vital minority in Pareto analysis. Ishikawa diagram shows a relation between considered consequence (small number of passed exams) and all factors that influence this consequence. Based on the results of implementation of the Lean Six Sigma method in the educational process and implementation of all suggested improvements, the comparative overview of Pareto analysis is given for 2009/2010 and 2012/2013 academic year at the Faculty of Mechanical Engineering, University of Niš.
Reference
Banuelas, R., Antony, J., & Brace, M. (2005). An application of Six Sigma to reduce waste. Quality and Reliability Engineering International, 21 (6), 553-570.
Basri, H. (2009). International benchmarking in higher education: A Case study for engineering education in Malaysia. The International Journal of Organization Innovation, 1 (3), 2-18.
Bhuiyan, N., & Baghel, A. (2005). An overview of continuous improvement: From the past to the present. Management Decision, 43 (5), 761-771.
Enarsson, L. (1998). Evaluation of suppliers: How to consider the environment. International Journal of Physical Distribution & Logistics Management, 28 (1), 5-17.
Ewell, P.T. (1993). Total quality and academic practise: The idea we’ve been waiting for? Change, 25 (3), 49–55.
Glover, W., Liu, W-H., Farris, J., & Van Aken, E. (2013). Characteristics of established kaizen event programs: An empirical study. International Journal of Operations & Production Management, 33 (9), 1166-1201.
Goh, T.N. (2010). Six Sigma in industry: Some observations after twenty-five years. Quality and Reliability Engineering International, 27 (2), 211-227.
Grosfeld-Nir, A., Ronen, B., & Kozlovski, N. (2007). The Pareto managerial principle: When does it apply?. International Journal of Production Research, 45 (10), 2317-2325.
Hampson, I. (1999). Lean production and the Toyota production system or, the case of the forgotten production concepts. Economic and Industrial Democracy, 20 (3), 369-391.
Helms, S., & Key, C.H. (1994). Are students more than customers in the classroom?. Quality Progress, 27 (9), 97–99.
Hines, P., & Rich, N. (1997). The seven value stream mapping tools. International Journal of Operations & Production Management, 17 (1), 46-64.
Holweg, M. (2007). The genealogy of Lean production. Journal of Operations Management, 25 (2), 420–437.
Hu, G., Wang, L., Fetch, S., & Bidanda, B. (2008). A multi-objective model for project portfolio selection to implement Lean and Six Sigma concept. International Journal of Production Research, 46 (23), 6611–6625.
Hwang, Y.D. (2006). The practices of integrating manufacturing execution system and Six Sigma methodology. International Journal of Advanced Manufacturing Technology, 30 (7-8), 761-768.
Ishikawa, K. (1982). Guide to quality control. 2nd Edition. Tokyo, Japan: Asian Productivity Organization.
Karapetrović, S., & Willborn, W. (1997). Creating zero-defect students. TQM Magazine, 9 (4), 287–291.
Linderman, K., Schroeden, R., Zaheer, S., & Choo, A. (2003). Six Sigma: A goal-theoretic perspective. Journal of Operations Management, 21 (2), 193-203.
Malik, N. (2010). A study on motivational factors of the faculty members at University of Balochistan. Serbian Journal of Management, 5 (1), 143-149.
Olivia, M.S., & Aspinwall, E.M. (1997). TQM in higher education – a review. International Journal of Quality & Reliability Management, 14 (5), 527–543.
Paramasivam, S., & Muthusamy, K. (2012). Study of critical success factors in engineering education curriculum development using Six-Sigma methodology. Procedia - Social and Behavioral Sciences, 56, 652-661.
Peitz, M., & Shin, D. (2013). Innovation and waste in supply chain management. Journal of Economic Behavior & Organization, 86, 191-199.
Quinn, A., Lemay, G., Larsen, P., & Johnson, D.M. (2009). Service quality in higher education. Total quality management and business excellence, 20 (2), 139-152.
Raisinghani, M.S., Ette, H., Pierce, R., Cannon, G., & Daripaly, P. (2005). Six Sigma: Concepts, tools, and applications. Industrial Management & Data Systems, 105 (4), 491 – 505.
Scott, P., & Leach, J. (2003). Individual and sociocultural views of learning in science education. Science & Education, 12 (1), 91-113.
Shan, R., Chandrasekaran, A., & Linderman, K. (2008). In pursuit of implementation patterns: The context of Lean and Six Sigma. International Journal of Production Research, 46 (23), 6679–6699.
Shah, R., & Ward, P.T. (2007). Defining and developing measures of Lean production. Journal of Operations Management, 25 (4), 785-805.
Stoiljković, V., Milosavljević, P., & Ranđelović, S. (2010). Six Sigma concept within banking system. African Journal of Business Management, 4 (8), 1480-1493.
Tribus, M. (2005). Some remarks on the improvement of engineering education. Journal of Science Education and Technology, 14 (1), 1-28.
Womack, J.P., & Jones, D.T. (2003). Lean thinking, Free Press. New York, NY, USA: Simon & Schuster Inc.
Womack, J.P., Jones, D.T., & Roos, D. (1990). The machine that changed the world: The story of Lean production. New York, NY, USA: Rawson and Associates.
The Author wishes to submit the Work to SJM for publication. To enable SJM to publish the Work and to give effect to the parties’ intention set forth herein, they have agreed to cede the first right to publication and republication in the SJM Journal.
Cession
The Author hereby cedes to SJM, who accepts the cession, to the copyright in and to the paper.
The purpose of the cession is to enable SJM to publish the Work, as first publisher world-wide, and for republication in the SJM Journal, and to grant the right to others to publish the Work world-wide, for so long as such copyright subsists;
SJM shall be entitled to edit the work before publication, as it deems fit, subject to the Authors approval
The Author warrants to SJM that:
- the Author is the owner of the copyright in the Work, whether as author or as reassigned from the Author’s employee and that the Author is entitled to cede the copyright to SJM;
- the paper (or any of its part) is not submitted or accepted for publication in any other Journal;
- the Work is an original work created by the Author;
- the Author has not transferred, ceded, or assigned the copyright, or any part thereof, to any third party; or granted any third party a licence or other right to the copyright, which may affect or detract from the rights granted to SJM in terms of this agreement.
The Author hereby indemnifies the SJM as a body and its individual members, to the fullest extent permitted in law, against all or any claims which may arise consequent to the warranties set forth.
No monetary consideration shall be payable by SJM to the Author for the cession, but SJM shall clearly identify the Author as having produced the Work and ensure that due recognition is given to the Author in any publication of the Work.
Should SJM, in its sole discretion, elect not to publish the Work within 1 year after the date of this agreement, the cession shall lapse and be of no further effect. In such event the copyright shall revert to the Author and SJM shall not publish the Work, or any part thereof, without the Author’s prior written consent.