Selection of non-conventional machining processes using the OCRA method
Sažetak
Selection of the most suitable nonconventional machining process (NCMP) for a given machining application can be viewed as multi-criteria decision making problem with many conflicting and diverse criteria. To aid these selection processes, different multi-criteria decision making (MCDM) methods have been proposed. This paper introduces the use of an almost unexplored MCDM method, i.e. operational competitiveness ratings analysis (OCRA) method for solving the NCMP selection problems. Applicability, suitability and computational procedure of OCRA method have been demonstrated while solving three case studies dealing with selection of the most suitable NCMP. In each case study the obtained rankings were compared with those derived by the past researchers using different MCDM methods. The results obtained using the OCRA method have good correlation with those derived by the past researchers which validate the usefulness of this method while solving complex NCMP selection problems.
Reference
Chakladar, N.D., & Chakraborty, S. (2008). A combined TOPSIS-AHP-method-based approach for non-traditional machining processes selection. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222 (12), 1613-1623.
Chakladar, N.D., Das, R., & Chakraborty, S. (2009). A digraph-based expert system for non-traditional machining processes selection. International Journal of Advanced Manufacturing Technology, 43 (3-4), 226-237.
Chakraborty, S., & Dey, S. (2006). Design of an analytic-hierarchy-process-based expert system for non-traditional machining process selection. International Journal of Advanced Manufacturing Technology, 31 (5-6), 490-500.
Chakraborty, S. (2011). Applications of the MOORA method for decision making in manufacturing environment. International Journal of Advanced Manufacturing Technology, 54 (9-12), 1155-1166.
Chatterjee, P., & Chakraborty, S. (2012). Material selection using preferential ranking methods. Materials and Design, 35 (1), 384-393.
Chatterjee, P., & Chakraborty, S. (2013). Nontraditional machining processes selection using evaluation of mixed data method. International Journal of Advanced Manufacturing Technology, 68 (5-8), 1613-1626.
Das, S., & Chakraborty, S. (2011). Selection of non-traditional machining processes using analytic network process. Journal of Manufacturing Systems, 30 (1), 41-53.
Hajkowicz, S., & Higgins, A. (2008). A comparison of multiple criteria analysis techniques for water resource management. European Journal of Operational Research, 184 (1), 255-265.
Kalpakjian, S., & Schmid, S.R. (2000). Manufacturing engineering and technology. New York, Prentice Hall.
Karande, P., & Chakraborty, S. (2012). Application of PROMETHEE-GAIA method for non-traditional machining processes selection. Management Science Letters, 2 (6), 2049-2060.
Kovačević, M., Madić, M., Radovanović, M., & Rančić, D. (2014). Software prototype for solving multi-objective machining optimization problems: application in non-conventional machining processes. Expert Systems with Applications, 41 (13), 5657-5668.
Parkan, C. (1991). The calculation of operational performance ratings. International Journal of Production Economics, 24 (1), 165-173.
Parkan, C., &, Wu, M.L. (1997). On the equivalence of operational performance measurement and multiple attribute decision making. International Journal of Production Research, 35 (11), 2963-88.
Parkan, C., &, Wu, M.L. (2000). Comparison of three modern multi criteria decision-making tools. International Journal of Systems Science, 31 (4), 497-517.
Prasad, K., & Chakraborty, S. (2014). A decision-making model for non-traditional machining processes selection. Decision Science Letters, 3 (4), 467–478.
Roy, M.K., Ray, A., & Pradhan, B.B. (2014). Non-traditional machining process selection using integrated fuzzy AHP and QFD techniques: a customer perspective. Production & Manufacturing Research, 2 (1), 530-549.
Sadhu, A., & Chakraborty, S. (2011). Non-traditional machining processes selection using data envelopment analysis (DEA). Expert Systems with Applications, 38 (7), 8770-8781.
Samanta, S., & Chakraborty, S. (2011). Parametric optimization of some non-traditional machining processes using artificial bee colony algorithm. Engineering Applications of Artificial Intelligence, 24 (6), 946-957.
Stanujkić, D., Đorđević, B., & Đorđević, M. (2013). Comparative analysis of some prominent MCDM methods: a case of ranking Serbian banks. Serbian Journal of Management, 8 (2), 213-241.
Temuçin, T., Tozan, H., Valíček, J., & Harničárová, M. (2013). A fuzzy based decision support model for non-traditional machining process selection. Technical Gazette, 20 (5), 787-793.
Venkata Rao, R. (2007). Decision Making in the Manufacturing Environment: using graph theory and fuzzy multiple attribute decision making methods. Springer-Verlag.
Yurdakul, M., & Cogun, C. (2003). Development of a multi-attribute selection procedure for nontraditional machining processes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 217 (7), 993-1009.
The Author wishes to submit the Work to SJM for publication. To enable SJM to publish the Work and to give effect to the parties’ intention set forth herein, they have agreed to cede the first right to publication and republication in the SJM Journal.
Cession
The Author hereby cedes to SJM, who accepts the cession, to the copyright in and to the paper.
The purpose of the cession is to enable SJM to publish the Work, as first publisher world-wide, and for republication in the SJM Journal, and to grant the right to others to publish the Work world-wide, for so long as such copyright subsists;
SJM shall be entitled to edit the work before publication, as it deems fit, subject to the Authors approval
The Author warrants to SJM that:
- the Author is the owner of the copyright in the Work, whether as author or as reassigned from the Author’s employee and that the Author is entitled to cede the copyright to SJM;
- the paper (or any of its part) is not submitted or accepted for publication in any other Journal;
- the Work is an original work created by the Author;
- the Author has not transferred, ceded, or assigned the copyright, or any part thereof, to any third party; or granted any third party a licence or other right to the copyright, which may affect or detract from the rights granted to SJM in terms of this agreement.
The Author hereby indemnifies the SJM as a body and its individual members, to the fullest extent permitted in law, against all or any claims which may arise consequent to the warranties set forth.
No monetary consideration shall be payable by SJM to the Author for the cession, but SJM shall clearly identify the Author as having produced the Work and ensure that due recognition is given to the Author in any publication of the Work.
Should SJM, in its sole discretion, elect not to publish the Work within 1 year after the date of this agreement, the cession shall lapse and be of no further effect. In such event the copyright shall revert to the Author and SJM shall not publish the Work, or any part thereof, without the Author’s prior written consent.