Mathematical modeling and identification of the mathematical model parameters of diesel fuel injection systems
Abstract
The aim of the paperis to highlight, if not all, then at least the most important benefits of the application of mathematical modeling in the development of a new solution or in the process of improvement and the optimization of an existing product. The thesis presents the basic principles of the model creation without providing a detailed mathematical interpretation of the process; therefore, the model includes a substantial number of unknown or approximately known parameters and it is not possible to create a model of the transparent cybernetic box type. In order to achieve a synthesis of the model and the experimental results, it is necessary to apply the optimization methods for the identification of unknown model parameters. The thesis presents the experimental results along with the results of modeling and identification as well as the analysis of the process of identification of unknown model parameters.
References
Astakhov, I.V., Trusov, V.I., Khachiyan, A.S., & Golubkov, L.N., 1972. Podaca i raspilivanie topliva v dizeljah (in Russian). Moskva: Mašinostroenie.
Fomin, J.J.,1973. Gidrodinamiceskij rascot toplivnih sustem dizelej s ispoljzovaniem ECVM (in Russian). Moskva: Masinostroenie.
Fox, J.A., 1977. Hydraulic Analysis of Unsteady Flow in Pipe Networks. London: University of Leads.
Gill, P.E., Murray, W., & Wright, M.H., 1981. Practical Optimization.London: Academic Press.
Hanjalić, K., 1978. Dinamika stišljivog fluida.Sarajevo: Svjetlost.
Huber, E.W., & Schaffitz, W., 1966. Eksperimentelle und theoretische Arbeiten zur Berechnung von Einspritzanlagen von Dieselmotoren. MTZ, 2.
Jankov, R., 1984. Matematičko modeliranje strujno-termodinamičkih procesa i pogonskih karakteristika dizel motora - kvazistacionarni model. Beograd: Naučna knjiga, I deo.
Murzin, D.S., 1990. Sposob opticeskogo kontrolja dvuhfaznoi sredi v processe toplivopodaci. DVS 6 (in Russian).
Thiemann, W., 1988. Zur Bestimmung des Einspritzverlaufs bei Dieseleinspritzanlagen mit Gleichraumentlastung. MTZ,5.
Tomić, M., 1987. Identifikacija parametara matematičkog modela strujno-termodinamičkih procesa dizel motora. Beograd: Mašinski fakultet.
Vengerskij, E.V., Morozov, V.A., & Usov, G.L., 1982. Gidrodinamika dvuhfaznih potokov v sistemah pitanija energeticeskih ustanovok (in Russian). Moskva: Masinostroenie.
Proposed Creative Commons Copyright Notices
Proposed Policy for Military Technical Courier (Journals That Offer Open Access)
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).