Assessment of protective clothing conformity with the requirements of protective clothing standards
Abstract
Assessing the compliance of protective clothing is carried out in accordance with the prescribed methods, standards, procedures and criteria in competent laboratories. This paper presents the process of assessing the conformity of the characteristics of special clothing for the protection of the body of the insulating type in accordance with the general requirements of the protective clothing standard (SRPS EN 340: 2007 Protective Clothing, General Requirements). The results presented in the paper indicate that the concept of conformity assessment does not simply involve checking the basic characteristics of a product (purpose, functionality, etc.), but also checking characteristics that are at first glance "of lesser significance" and can influence the safe use of protective clothing.
References
Brkljač, N. 2009. Struktura i funkcija procesnog modela sistema opremanja Vojske. Belgrade: Tehnički opitni centar/Technical Test Center (in Serbian).
-Institut za standardizaciju Srbije/Institute for Standardization of Serbia. 2007a. Rečnik i opšti principi. In Standard SRPS ISO/IEC 17000: 2007 Ocenjivanje usaglašenosti. Belgrade: Institut za standardizaciju Srbije/Institute for Standardization of Serbia (in Serbian).
-Institut za standardizaciju Srbije/Institute for Standardization of Serbia. 2007b. Standard SRPS EN 340: 2007. Zaštitna odeća - opšti zahtevi. Belgrade: Institut za standardizaciju Srbije/Institute for Standardization of Serbia (in Serbian).
-Institut za standardizaciju Srbije/Institute for Standardization of Serbia. 2007c. Standard SRPS ЕN 13402-1: 2007. Označavanje veličine odeće, deo 1 - Termini, definicije I postupak merenja tela. Belgrade: Institut za standardizaciju Srbije/Institute for Standardization of Serbia (in Serbian).
-Institut za standardizaciju Srbije/Institute for Standardization of Serbia. 2007d. Standard SRPS ЕN 13402-2: 2007. Označavanje veličine odeće, deo 2 - Primarne i sekundarne mere. Belgrade: Institut za standardizaciju Srbije/Institute for Standardization of Serbia (in Serbian).
-Institut za standardizaciju Srbije/Institute for Standardization of Serbia. 2015. Standard SRPS ЕN 13402-3: 2015. Označavanje veličine odeće, deo 3 - Mere tela i intervali. Belgrade: Institut za standardizaciju Srbije/Institute for Standardization of Serbia (in Serbian).
Jovanović, D. 2013. Istraživanje sredstava za unapređenje fiziološke podobnosti u uslovima visokotoksične kontaminacije i visokih ambijentalnih temperature. Belgrade: University of Defence, Military Academy (in Serbian).
Karkalić, R., & Popović, R. 2004. Influence of composition and number of layers on physical-mechanical properties of textile/PUR/PES (membrane) laminate composites. In: VI Međunarodni kogres „Yucomat 2004“, Herceg Novi.
Karkalić, R. 2006. Optimizacija tankoslojnih sorpcionih ugljeničnih materijala ugrađenih u sredstva ABHO u funkciji zaštitnih karakteristika i fiziološke podobnosti. Belgrade: Military Academy. Ph.D. thesis (in Serbian).
-Tehnički opitni centar/Technical Test Center. 2015. Fotoarhiva iz dosijea zadatka završnog ispitivanja čelne serije Kombinezona zaštitnog M5. Belgrade: Tehnički opitni centar/Technical Test Center (in Serbian).
-Vojnotehnički institut/Military Technical Institute. 1985. Propis o kvalitetu proizvoda za KZ-M5. Belgrade: Vojnotehnički institut/Military Technical Institute (in Serbian).
- Vojnotehnički institut/Military Technical Institute. 2016. Primena tehnilogija veštačke termoregulacije u poboljšanju fiziološke podobnosti opreme za nuklearnu, hemijsku i biološku zaštitu vojnika. Naučnotehnička informacija. Belgrade: Vojnotehnički institut/Military Technical Institute (in Serbian).
Proposed Creative Commons Copyright Notices
Proposed Policy for Military Technical Courier (Journals That Offer Open Access)
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).