Analysis of the capacity changes in the "Garajevac-istok" excavation by applying the GIS technology
Abstract
The paper discusses the concept of construction and monitoring of capacity changes - the volume of the "Garajevac-Istok" excavation (mine), located in the cadastral municipality of Novi Bečej. Namely, in the earlier period, the physical surface of the Earth and geospace in general were shown two-dimensionally (2D), in a plane, by some of the cartographic methods (contour lines, points heights, hypsometry) or three-dimensionally (3D), by modeling of reliefs and relief cards. The cartographic principles of terrain making and visualizing on relief mapping models allow the creation of 3D views, but not enough quality and engineering precise 3D terrain models. In addition, there is a possibility of quantitative and qualitative assessment of the terrain on the mentioned models not to be accurate enough. With new technologies, the 3D geospatial display mode changes, and the concept of digital terrain modeling (DTM) is being applied. The main goal of the work is to create 3D models and to give an analysis of the "Garajevac-Istok" mine for a certain period of exploitation.
References
-Autodesk. 2018. Products, 3D CAD SOFTWARE, AutoCAD Civil 3D. [Internet] Available at: http://www.autodesk.com. Accessed: 28.10.2018.
Arrighi, P., & Soill, P. 1999. From Scanned Topographic Maps to Digital Elevation Models. In Proc. of Geovision’99, International Symposium on Imaging Applications in Geology, USA.
Ceylan, A., Karabork, H., & Ekozoglu, I. 2011. An analysis of bathymetric changes in Altinapa reservoir. Carpathian Journal of Earth and Environmental Sciences, 6(2), pp.15-24. Available at: http://www.ubm.ro/sites/CJEES/viewTopic.php?topicId=152. Accessed: 21.09.2018.
Chappel, E. 2014. AutoCAD Civil 3D 2015 Essentials.Indianapolis, Indiana, USA: Autodesk Offical Press.
Cross, B.K., & Moore, B.C. 2014. Lake and reservoir volume: Hydroacoustic survey resolution and accuracy. Lake and Reservoir Management, 30(4), pp.405-411. Available at: https://doi.org/10.1080/10402381.2014.960115.
-Environmental Systems Research Institute (ESRI). 2010. "Using Arc GIS 3D Analyst", User Guide.Redlands, USA.
Li, Z., Zhu, Q., & Gold, C. 2005. Digital terrain modeling - principles and methodology.Florida, USA: CRC Press.
Omura, G., & Benton, C.B. 2013. Mastering AutoCAD 2014 and AutoCAD LT 2014.Inianapolis, Indiana, USA: Autodesk Offical Press.
Simon, B.J., & Howel, J.A. 2007. Terrestrial laser scanning in geology: Data acquisition, processing and accuracy considerations.London, UK: The Geological Society of London.
Šiljeg, A., Barada, M., & Marić, I. 2018. Digitalno modeliranje reljefa.Zadar: Sveučilište u Zadru (in Croatian).
Zhang, L. 2005. Automatic Digital Surface Model (DSM) Generation from Linear Array Images.Swiss: Swiss Federal Institute of Technology. A dissertation submitted.
Proposed Creative Commons Copyright Notices
Proposed Policy for Military Technical Courier (Journals That Offer Open Access)
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).