Treatment of bauxite residues - acidic leaching (first part)

Keywords: bauxite residues, aluminium, hydrometallurgy, acid, recycling, rare earth elements

Abstract


Introduction/purpose: Bauxite residue as a waste product from the aluminium industry produced through the Bayer process is mainly composed of iron oxide, titanium oxide, silicon oxide and undissolved alumina together with a wide range of other oxides and a minor content of rare earth elements, gallium, vanadium and scandium, which vary according to the country of origin of the bauxite. The extraction of valuable elements from bauxite residues and the minimisation of bauxite residues during different treatments are an open research field.

Methods: Different hydrometallurgical and pyrometallurgical methods were used for the treatment of bauxite residues. In this study, the results of the hydrometallurgical treatment of bauxite residue from Alumina Zvornik using sulfuric acid and hydrochloric acid will be shown in order to study the change of the mineralogical composition. Leaching efficiency will be calculated using the ICP OES analysis. The XRD-Analysis was used for the characterization of the initial material and solid residues studying the change of the mineralogical phases.

Results: Leaching of bauxite residues with sulphuric and hydrochloric acid leads partially to the change of mineralogical structure and the transfer of elements into a liquid phase. Natural precipitation of iron is observed over time. Silica gel formation is confirmed during leaching of bauxite residues with hydrochloric acid.

Conclusion: A new research strategy for treating bauxite residue is needed in order to ensure a complete change of the initial minearlogical structure and the most efficient transfer of metals into a liquid phase. 

Author Biography

Srećko R. Stopić, RWTH Aachen University, IME Process Metallurgy and Metal Recycling, Aachen, Federal Republic of Germany

Dr.-Ing. tehnickih nauka

Metalurgija, naucni saradnik

References

Alkan, G., Yagmurlu, B., Cakmakoglu, S., Hertel, T., Kaya, S., Gronen, L., Stopic, S. & Friedrich, B. 2018. Novel Approach for Enhanced Scandium and Titanium Leaching Efficiency from Bauxite Residue with Suppressed Silica Gel Formation. Scientific Reports, 8, art.number:5676. Available at: https://doi.org/10.1038/s41598-018-24077-9.

Binnemans, K., Jones, P.T., Blanpain, B., van Garven, T. & Pontikes, Y. 2015. Towards zero-waste valorisation of rare-earth-containing industrial process residues: a critical review. Journal of Cleaner Production, 99, pp.17-38. Available at: https://doi.org/10.1016/j.jclepro.2015.02.089.

Castaldi, P., Silvetti; M., Santona, L., Enzo, S. & Melis, P. 2008. XRD, FTIR, and thermal analysis of bauxite ore-processing waste (red mud) exchanged with heavy metals. Clays and Clay Minerals, 56, pp.461-469. Available at: https://doi.org/10.1346/CCMN.2008.0560407.

Damjanović, V., Kostić, D., Ostojić, Z., Perušić, M., Filipović, R., Oljača, Dj., Obrenović, Z. & Mićić, V. 2020. The Influence of Process Parameters on Removing Iron, Zinc and Copper Impurities from Synthetic Bayer Liquor. In: TRAVAUX 49, Proceedings of the 38th International ICSOBA Conference, virtual, pp.325-334, November 16-18 [online]. Available at: https://icsoba.org/assets/files/publications/2020/AA21S.pdf [Accessed: 1 June 2023].

Lazou, A., van der Eijk, C., Balomenos, E., Kolbeinsen, L. & Sfarian, J. 2020. On the Direct Reduction Phenomena of Bauxite Ore Using H2 Gas in a Fixed Bed Reactor. Journal of Sustainable Metallurgy, 6, pp.227-238. Available at: https://doi.org/10.1007/s40831-020-00268-5.

Lucas, H., Alkan, G., Xakalashe, B. & Friedrich, B. 2018. Conditioning of bauxite residue with bottom ash in view of recovery of valuable metals: A sustainable approach. In: 2nd international Bauxite Residue Valorisation and Best Practices Conference (BR2018), Athens, Greece, pp.263-270, May 7-10.

Lucas, H., Stopic, S., Xakalashe, B., Ndlovu, S. & Friedrich, B. 2021. Synergism Red Mud-Acid Mine Drainage as a Sustainable Solution for Neutralizing and Immobilizing Hazardous Elements. Metals, 11(4), art.number:620. Available at: https://doi.org/10.3390/met11040620.

Rivera, R.M., Ulenaers, B., Ounoughene, G, Binnemans, K. & van Gerven, T. 2017. Behaviour of Silica during Metal Recovery from Bauxite Residue by Acidic Leaching. In: Travaux 46, Proceedings of 35th International ICSOBA Conference, Hamburg, Germany, pp.547-556, October 2-5 [online]. Available at: https://icsoba.org/assets/files/publications/2017/BR13S%20-%20Behavior%20of%20Silica%20during%20Metal%20Recovery%20from%20Bauxite%20Residue%20by%20Acidic%20Leaching.pdf [Accessed: 1 June 2023].

Xakalashe, B. & Friedrich, B. 2018. Combined carbothermic reduction of bauxite residue and basic oxygen furnace slag for enhanced recovery of Fe and slag conditioning. In: 2nd international Bauxite Residue Valorisation and Best Practices Conference (BR2018), Athens, Greece, pp.233-240, May 7-10.

Yagmurlu, B., Alkan, G., Xakalashe, B., Schier, C., Gronen, L., Koiwa,I., Dittrich, C. & Friedrich, B. 2019. Synthesis of Scandium Phosphate after Peroxide Assisted Leaching of Iron Depleted Bauxite Residue (Red Mud) Slags. Scientific Reports, 9, art.number:11803. Available at: https://doi.org/10.1038/s41598-019-48390-z.

Published
2023/12/04
Section
Original Scientific Papers