Corrosion of Zn-Ni coated reinforcing steel in simulated concrete pore solutions
Abstract
Introduction/purpose: The anticorrosion protection of steel reinforcement bars in concrete is a critical concern in civil engineering, particularly for the construction of concrete structures intended for military applications. Currently, the most important methods for achieving this protection include the application of coatings on steel rebar (such as epoxy or hot-dip galvanized zinc), the use of stainless-steel rebar, composite rebars, or high-performance concrete that incorporates corrosion inhibitors, surface sealers, silica fume, or fly ash admixtures.
Methods: This study aims to determine whether an electroplated Zn-Ni coating of sufficient thickness can offer better long-term corrosion resistance to reinforcing steel in concrete compared to the traditional pure Zn coating typically used for this purpose. The Zn-Ni coatings produced were 40 µm thick and contained approximately 13 mass.% Ni. Scanning electron microscopy revealed a smooth and homogeneous surface morphology, although microcracks extending through the entire coating depth were observed. The protective effectiveness of the coatings was evaluated using electrochemical impedance spectroscopy, with samples immersed in various electrolytes that simulate the chemical environments present in different types of concrete.
Results: The measurements indicated a significantly slower dissolution rate of the corrosion product formed on the Zn-Ni coating in chloride-rich environments, compared to pure Zn.
Conclusion: It can be concluded that Zn-Ni alloy presents a viable alternative to pure Zn for protecting steel in concrete structures where high chloride penetration is anticipated.
References
-ASTM. 2019. ASTM B841-18: Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits, 12 March. Available at: https://doi.org/10.1520/B0841-18.
Bajat, J.B., Maksimović, M.D., Mišković-Stanković, V.B. & Zec, S. 2001. Electrodeposition and characterization of Zn-Ni alloys as sublayers for epoxy coating deposition. Journal of Applied Electrochemistry, 31, pp.355-361. Available at: https://doi.org/10.1023/A:1017580019551.
Bajat, J.B. & Mišković-Stanković, V.B. 2004. Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn–Ni alloys. Progress in Organic Coatings, 49(3), pp.183-196. Available at: https://doi.org/10.1016/j.porgcoat.2003.09.019.
Cao, Z., Kong, G., Che, C. & Wang, Y. 2017. Influence of Nd addition on the corrosion behavior of Zn-5%Al alloy in 3.5 wt.% NaCl solution. Applied Surface Science, 426, pp.67-76. Available at: https://doi.org/10.1016/j.apsusc.2017.07.109.
Dong, S., Zhao, B., Lin, C., Du, R., Hu, R. & Zhang, G.X. 2012. Corrosion behavior of epoxy/zinc duplex coated rebar embedded in concrete in ocean environment. Construction and Building Materials, 28(1), pp.72-78. Available at: https://doi.org/10.1016/j.conbuildmat.2011.08.026.
El-Sayed, A.R., Abd El-Lateef, H.M. & Mohran, H.S. 2015. Effect of nickel content on the anodic dissolution and passivation of zinc–nickel alloys in alkaline solutions by potentiodynamic and potentiostatic techniques. Bulletin of Materials Science, 38, pp.379-391. Available at: https://doi.org/10.1007/s12034-014-0814-7.
El-Sayed, A.R., Mohran, H.S. & Abd El-Lateef, H.M. 2011. Inhibitive action of ferricyanide complex anion on both corrosion and passivation of zinc and zinc–nickel alloy in the alkaline solution. Journal of Power Sources, 196(15), pp.6573-6582. Available at: https://doi.org/10.1016/j.jpowsour.2011.03.057.
Emel’yanov, A.V., Sapunov, S.Yu. & Kudryakov, O.V. 2009. Principles of controlling crystallization kinetics for a multicomponent coating on steel. Metallurgist, 53, pp.648-654. Available at: https://doi.org/10.1007/s11015-010-9228-y.
Farina, S.B. & Duffo, G.S. 2007. Corrosion of zinc in simulated carbonated concrete pore solutions. Electrochimica Acta, 52(16), pp.5131-5139. Available at: https://doi.org/10.1016/j.electacta.2007.01.014.
Hamlaoui, Y., Pedraza, F. & Tifouti, L. 2008. Corrosion monitoring of galvanised coatings through electrochemical impedance spectroscopy. Corrosion Science, 50(6), pp.1558-1566. Available at: https://doi.org/10.1016/j.corsci.2008.02.010.
Hosseini, M.G., Abdolmaleki, M. & Ashrafpoor, S. 2012. Preparation, characterization, and application of alkaline leached Ni/Zn–Ni binary coatings for electro-oxidation of methanol in alkaline solution. Journal of Applied Electrochemistry, 42, pp.153-162. Available at: https://doi.org/10.1007/s10800-012-0382-8.
Hsu, C.H. & Mansfeld, F. 2001. Concerning the conversion of the constant phase element parameter Y0 into a capacitance. Corrosion, 57(9), pp.747-748. Available at: https://doi.org/10.5006/1.3280607.
Kaesche, H. 1964. The passivity of zinc in aqueous solutions of sodium carbonate and sodium bicarbonate. Electrochimica Acta, 9(4), pp.383-394. Available at: https://doi.org/10.1016/0013-4686(64)80044-X.
Kwon, M., Jo, D., Cho, S., Kim, H., Park, J.T. & Park, J.M. 2016. Characterization of the influence of Ni content on the corrosion resistance of electrodeposited Zn–Ni alloy coatings. Surface and Coatings Technology, 288, pp.163-170. Available at: https://doi.org/10.1016/j.surfcoat.2016.01.027.
Moreno, M., Morris, W., Alvarez, M. G. & Duffo, G. S. 2004. Corrosion of reinforcing steel in simulated concrete pore solutions. Effect of carbonation and chloride content. Corrosion Science, 46(11), pp.2681-2699. Available at: https://doi.org/10.1016/j.corsci.2004.03.013.
Mosavat, S.H., Shariat, M.H. & Bahrololoom, M.E. 2012. Study of corrosion performance of electrodeposited nanocrystalline Zn–Ni alloy coatings. Corrosion Science, 59, pp.81-87. Available at: https://doi.org/10.1016/j.corsci.2012.02.012.
Padilla, V. & Alfantazi, A. 2014. Corrosion film breakdown of galvanized steel in sulphate–chloride solutions. Construction and Building Materials, 66, pp.447-457. Available at: https://doi.org/10.1016/j.conbuildmat.2014.05.053.
Qiao, X., Guan, H., Zhou, Z., Song, D. 2024. Research Progress in Corrosion Behavior and Anti-Corrosion Methods of Steel Rebar in Concrete. Metals, 14(8), art.number:862. Available at: https://doi.org/10.3390/met14080862.
Ravindran, V. & Muralidharan, V.S. 2006. Characterization of zinc–nickel alloy electrodeposits obtained from sulphamate bath containing substituted aldehydes. Bulletin of Materials Science, 29, pp.293-301. Available at: https://doi.org/10.1007/BF02706499.
Roventi, G., Bellezze, T., Barbaresi, E. & Fratesi, R. 2013. Effect of carbonation process on the passivating products of zinc in Ca(OH)2 saturated solution. Materials Corrosion, 64(11), pp.1007-1014. Available at: https://doi.org/10.1002/maco.201206868.
Roventi, G., Bellezze, T., Giuliani, G. & Conti, C. 2014. Corrosion resistance of galvanized steel reinforcements in carbonated concrete: effect of wet–dry cycles in tap water and in chloride solution on the passivating layer. Cement and Concrete Research, 65, pp.76-84. Available at: https://doi.org/10.1016/j.cemconres.2014.07.014.
Short, N.R., Zhou, S. & Dennis, J.K. 1996. Electrochemical studies on the corrosion of a range of zinc alloy coated steel in alkaline solutions. Surface and Coatings Technology, 79(1-3), pp.218-224. Available at: https://doi.org/10.1016/0257-8972(95)02428-X.
Sistonen, E., Cwirzen, A. & Puttonen, J. 2008. Corrosion mechanism of hot-dip galvanised reinforcement bar in cracked concrete. Corrosion Science, 50(12), pp.3416-3428. Available at: https://doi.org/10.1016/j.corsci.2008.08.050.
Sriraman, K., Brahimi, S., Szpunar, J., Osborne, J. & Yue, S. 2013. Characterization of corrosion resistance of electrodeposited Zn–Ni Zn and Cd coatings. Electrochimica Acta, 105, pp.314-323. Available at: https://doi.org/10.1016/j.electacta.2013.05.010.
Tan, Z.Q. & Hansson, C.M. 2008. Effect of surface condition on the initial corrosion of galvanized reinforcing steel embedded in concrete. Corrosion Science, 50(9), pp.2512-2522. Available at: https://doi.org/10.1016/j.corsci.2008.06.035.
Tian, W., Xie, F.Q., Wu, X.Q. & Yang, Z.Z. 2009. Study on corrosion resistance of electroplating zinc–nickel alloy coatings. Surface and Interface Analysis, 41(3), pp.251-254. Available at: https://doi.org/10.1002/sia.3017.
Wang, Y.-q., Kong, G., Che, C.-s. 2019. Corrosion Behavior of Zn-Al, Zn-Mg, and Zn-Mg-Al coatings in simulated concrete pore solution. Corrosion, 75(2), pp.203-209. Available at: https://doi.org/10.5006/3029.
Wilcox, G.D. & Gabe, D.R. 1993. Electrodeposited zinc alloy coatings. Corrosion Science, 35(5-8), pp.1251-1258. Available at: https://doi.org/10.1016/0010-938X(93)90345-H.
Wu, P.-p., Zhang, Z.-z., Xu, F.-j., Deng, K., Nie, K.-b. & Gao, R. 2017. Effect of duty cycle on preparation and corrosion behavior of electrodeposited calcium phosphate coatings on AZ91. Applied Surface Science, 426, pp.418-426. Available at: https://doi.org/10.1016/j.apsusc.2017.07.111.
Copyright (c) 2024 Mihael M. Bučko, Ljubica M. Radović, Marko N. Dimitrijević, Radovan M. Karkalić, Jelena B. Bajat
This work is licensed under a Creative Commons Attribution 4.0 International License.
Proposed Creative Commons Copyright Notices
Proposed Policy for Military Technical Courier (Journals That Offer Open Access)
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).