Research into the effect of ammunition belt stiffness on the operation of automatic firing systems using experimental methods
Abstract
Introduction/purpose: This article focuses on determining the dynamic characteristics of the automatic firing system through experimental methods. Additionally, the study mentions the impact of ammunition belt stiffness.
Methods: The research findings include the displacements of the basic part (bolt carrier) and the ammunition belt of automatic weapons during firing series. To measure and determine these parameters, a high-speed camera model FASTCAM SA1.1, specifically the 675K-C1 variant, was utilized. The elastic force between the belt links was determined using deformation stamps equipped with force-measuring sensors. To validate the reliability of the method, experiments were conducted on the PKMS machine gun.
Results: The results obtained show that, when using a tape with a stiffness of 42 [N/mm], the kinematic characteristics of the basic link such as recoil velocity and recoil time change significantly compared to using a tape which has a stiffness of 98 [N/mm]. In particular, the maximum recoil velocity of the base gun can be reduced by ~8% when firing a series of 6 bullets. These results can be applied in calculations and designs to optimize the structure of the ammunition belt and the automatic firing system. Furthermore, these findings can aid in calculating the firing rate of the gun, thus facilitating the operation of automatic weapons.
Conclusion: The testing procedure developed in this study serves as a crucial theoretical foundation for evaluating and determining the dynamic characteristics of other automatic weapon systems.
References
Balla, J., Havlicek, M., Jedlicka, L., Krist, Z. & Racek, F. 2010. Dynamics of automatic weapon mounted on the tripod. In: Rogozea, L. (Ed.) MACMESE'10: Proceedings of the 12th WSEAS international conference on Mathematical and computational methods in science and engineering, Faro, Portugal, pp.122-127, November 3-5. Stevens Point, Wisconsin, USA: World Scientific and Engineering Academy and Society (WSEAS). Available at: https://dl.acm.org/doi/10.5555/1948857.1948881.
Balla, J., Havlicek, M., Jedlicka, L., Krist, Z., & Racek, F. 2011. Firing stability of mounted small arms. International Journal of Mathematical Models and Methods in Applied Sciences, 5(2), pp.412-422 [online]. Available at: https://www.naun.org/main/NAUN/ijmmas/19-818.pdf [Accessed: 01 November 2024].
Balla, J., Krist, Z. & Le, C.L. 2015. Experimental study of turret-mounted automatic weapon vibrations. International Journal of Mechanics, 9, pp.16-25 [online]. Available at: https://www.naun.org/main/NAUN/mechanics/2015/a062003-137.pdf [Accessed: 01 November 2024].
Balla, J. & Mach, R. 2007. Kinematics and dynamics of Gatling weapons. Advances in Military Technology, 2(2), pp.121-133 [online]. Available at: https://www.aimt.cz/index.php/aimt/article/view/1691 [Accessed: 01 November 2024].
Bien, V.V., Macko, M. & Hung, M.D. 2021a. Experimental Study of Automatic Weapons Vibrations When Firing Series. Problems of Mechatronics. Armament, Aviation, Safety Engineering, 12(4), pp.9-28. Available at: https://doi.org/10.5604/01.3001.0015.5984.
Bien, V.V., Phuc, T.V. & Macko, M. 2021b. Effect of Some Structural Parameters on Firing Stability of Shooter-Weapon System. Advances in Military Technology, 16(2), pp.235-251.Available at: https://doi.org/10.3849/aimt.01487.
Dingguo, Z. 1996. Computer simulation of the motion of the bullet belt of an airplane gun. Applied Mathematics and Mechanics, 17(11), pp.1059-1066. Available at: https://doi.org/10.1007/BF00119953.
Doan, D.V., Bien, V.V., Quang, M.A. & Phu, N.M. 2023. A Study on Multi-Body Modeling and Vibration Analysis for Twin-Barrel Gun While Firing on Elastic Ground. Applied Engineering Letters, 8(1), pp.36-43. Available at: https://doi.org/10.18485/aeletters.2023.8.1.5.
Dung, D.T., Phu, M.N., Bien, V.V., Phon, D.N., Macko, M. & Vitek, M. 2023. Analysis of gas flow losses in a gas-operated gun. In: 2023 International Conference on Military Technologies (ICMT), Brno, Czech Republic, pp.1-7, July 11. Available at: https://doi.org/10.1109/ICMT58149.2023.10171337.
Fiser, M., 2007. Automatic weapons – design and testing. Trencin, Slovak Republic: Alexander Dubček University of Trenčín. ISBN: 80-8575-089-0.
Fiser, M. & Popelinsky, L. 2007. Small Arms. Brno, Czech Republic: University of Defence. ISBN: 978-80-7231-475-1.
Goldberg, M.S. & Goldberg, D.M. 2019. Optimizing the Purchases of Military Air-To-Ground Weapons. Military Operations Research, 24(4), pp.37-52 [online]. Available at: https://www.jstor.org/stable/26853512 [Accessed: 01 November 2024].
Macko, M., Vo, B.V. & Mai, Q.A. 2021. Dynamics of Short Recoil-operated Weapon. Problems of Mechatronics, Armament, Aviation, Safety Engineering, 12(3), pp.9-26.Available at: https://doi.org/10.5604/01.3001.0015.2432.
Tien, V.D., Macko, M., Procházka, S. & Bien, V.V. 2022. Mathematical Model of a Gas-Operated Machine Gun. Advances in Military Technology, 17(1), pp.63-77. Available at: https://doi.org/10.3849/aimt.01449.
Tien, V.D., Procházka, S., Krist, Z. & Vo, B.V. 2021. Influence of Gas Port on Forces and Their Impulses Acting in an Automatic Weapon. In: 2021 International Conference on Military Technologies (ICMT), Brno, Czech Republic, pp.1-8, June 08-11. Available at: https://doi.org/10.1109/ICMT52455.2021.9502832.
Van Hung, N., Van Dung, N., Van Minh, P., Van Ke, T., & Van Thom, D. 2024. Vibration Behavior Analysis of the Ammunition Belt of the Gas-Operated Machine Gun. Journal of Vibration Engineering & Technologies, 12, pp.1563-1575. Available at: https://doi.org/10.1007/s42417-023-00926-4.
Vitek, R. 2019. Analyses of the Measurement Accuracy of the Optical Light Gates. In: 2019 International Conference on Military Technologies (ICMT), Brno, Czech Republic, pp.1-11, May 30-31. Available at: https://doi.org/10.1109/MILTECHS.2019.8870114.
Vo, V.B., Macko, M. & Dao, H.M. 2021. Experimental Study of Automatic Weapon Vibrations when Burst Firing. Problems of Mechatronics. Armament, Aviation, Safety Engineering, 12(4), pp.9-28. Available at: https://doi.org/10.5604/01.3001.0015.5984.
Wang, G. & Jiang, T. 2008. Simulation and experiment of multi-body system dynamic model with clearance joint for ammunition belt system. Journal of Mechanical Engineering, 44(5), pp.238-241.
Copyright (c) 2025 Bien V. Vo, Phon D. Nguyen, Phu M. Nguyen, Long X. Vu
This work is licensed under a Creative Commons Attribution 4.0 International License.
Proposed Creative Commons Copyright Notices
Proposed Policy for Military Technical Courier (Journals That Offer Open Access)
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).